It is very slow to burn even in contact with flame; has excellent moisture management; has excellent static resistance
; is soft and comfortable; has natural elasticity; is breathable and easy to care for.
Part 2.1 of RFE block models the static resistance
forces when damper's blade is not affected by pressure of explosion wave:
Designed for all commercial vessels even when slow or ultra slow steaming, new Intersleek 1100SR slime release technology delivers outstanding macro and micro fouling control with good static resistance
even in warm waters.
The static resistance force model has been developed for the different motions in [18-21].
The forces acting along the vertical z-axis are the gravity force G, the vertical static resistance force [F.sub.sv], and the vertical component of the dynamic frictional force [F.sub.d].
The research results using a dilute granular flow condition which is not affected by the static resistance force [36, 38, 40] and the studies at low-speed impact [23,26] shows the quadratic drag force model is better for the dynamic frictional force [F.sub.d] than the linear equation model even at relatively low speed.
Average cyclic screw head pull-through resistance was higher than static resistance for all of the tested panels (Table 8).
Comparing the cyclic and static tests it was found that the cyclic resistance was higher than the static resistance for the 15-mm OSB and particleboard specimens.
But there were points on which members could not agree - among them whether to limit the number of Taser applications allowed on one person and whether Tasers should ever be activated against people who are fleeing from an officer or offering "static resistance
," such as holding onto a fixed object.
Characteristics of PVA as a raw material include low linting, flame and static resistance
, solvent and chemical resistance, UV resistance and very high strength and in particular with hot water soluble PVA, biodegradation.
Therefore, in spite of a slightly longer fatigue life, the static-to-fatigue ratios of the joints with larger gusset-plates turned out to be higher for both unglued and glued joint assemblies because of their higher static resistance