spiral line

spiral line

References in periodicals archive ?
Superiorly, lateral lip blends with broad and rough gluteal tuberosity, and the medial lip continues as narrow spiral line. The spiral line later continues as inter trochanteric line near the lesser trochanter.
The Baptistry is distinctive in the use of a spiral line to the roof which leads the eye up to the steeple, creating a circular space lit from the roof light above.
Center the stencil on each rectangle; mark the outline and along the inner spiral line using a fabric marking pencil.
For brevity, only the effects of the DRA height h, stub line length [l.sub.6] and the fourth segment spiral line length [l.sub.5] on the antenna performance are presented.
This paper researches on the geometrical property of spiral line in cylindrical surface which is helpful to the variable lead transmission performance.
In the spiral heat source model, the buried coil is represented by a spiral line heat source with pitch b and emits heat at intensity [q.sub.l]b for each pitch section, where [q.sub.l] is the heating intensity per length of the heat source as defined in the cylindrical source model for convenience in comparison.
The "Spiral Line" shows how to address and then try to resolve rotational compensations in a way that no analysis of any single muscle can give.
The crests of the standard male thread form are then drawn tightly against the wedge ramp, eliminating radial clearances and creating a continuous spiral line contact along the entire length of the thread engagement.
(6) Note that information flows uninterruptedly along a spiral line but not along the axis of table movement (z-axis), where information is intermittent and subdivided by intervals if the pitch is >1.
A continuous spiral line contact along the length of the thread engagement spreads the clamp force more evenly over all engaged threads to help with resistance to vibrational loosening, axial-torsional loading, joint fatigue and temperature extremes.
BM produces its SAW spiral line pipes in its Izmit plant with total capacity of 150,000 tons, between 14-100 inches diameter, for oil, gas and water pipes as well as piling applications.
Once clamp load is applied, it establishes a continuous spiral line of contact along the entire length of thread engagement, which more evenly distributes the loads of the threaded joint throughout all the engaged threads.