sinter

(redirected from sinters)
Also found in: Dictionary, Thesaurus, Encyclopedia.

sin·ter

(sin'tĕr),
To heat a powdered substance without thoroughly melting it, causing it to fuse into a solid but porous mass.
[Ger. dross, slag]

sinter

(sĭn′tĕr)
1. The calcium or silica deposits formed from water obtained from mineral springs.
2. To reduce material to a solid form by heating without melting.

sin·ter

(sin'tĕr)
To heat a powdered substance without thoroughly melting it, causing it to fuse into a solid but porous mass.
[Ger. dross, slag]
Mentioned in ?
References in periodicals archive ?
With the increase in oxygen enrichment load, the drum strength of the sintered ore increases from 65.33% to 68.00%, antiwear index decreases from 5.27% to 4.80%, and yield increases from 82.29% to 83.39%.
Table 9 shows the main components of the sintered ore with different oxygen enrichment loads.
Figure 5 shows the phase diagram of the finished sintered ore with different oxygen enrichment loads.
Figure 5 shows the test results of [RDI.sub.>3.15] of the sintered ore with different oxygen enrichment loads.
Table 10 shows the test results of the softening performance of the sintered ore with different oxygen enrichment loads.
Table 11 shows the technical indices in the sinter pot experiment with different ignition temperatures.
A Tabela 1 apresenta os resultados obtidos no primeiro experimento sobre o Sinter Fragmento.
A Tabela 2 mostra as fracoes de fase medidas no mosaico completo a 5x e nas imagens a 20x da amostra Sinter Fragmento, assim como o erro relativo calculado tomando-se os resultados em maior aumento como referencia.
No entanto, devido a heterogeneidade do sinter, e necessario um grande numero de campos para garantir representatividade ao resultado.
A Figura 3 exibe a tela do software de quantificacao por Rietveld da amostra Sinter Britado.
Este trabalho apresenta o desenvolvimento de uma metodologia para caracterizacao quantitativa de sinter, em diferentes resolucoes, combinando microscopia digital e analise de imagens.
Assim, constitui-se em uma promissora tecnica para analise de materiais nao uniformes, como o sinter.