round

(redirected from roundness)
Also found in: Dictionary, Thesaurus, Idioms, Encyclopedia, Wikipedia.
Related to roundness: concentricity, circularity, cylindricity

round

Medspeak
verb To visit those patients for whom a physician is responsible.
 
Vox populi
adjective Without straight lines meeting at a corner or corners; not square.
Segen's Medical Dictionary. © 2012 Farlex, Inc. All rights reserved.

round

verb To visit those Pts for whom a physician is responsible. See Rounds.
McGraw-Hill Concise Dictionary of Modern Medicine. © 2002 by The McGraw-Hill Companies, Inc.

round

(rownd) [O.Fr. ronde]
1. Circular.
2. Spherical, globular.
Medical Dictionary, © 2009 Farlex and Partners
References in periodicals archive ?
It is noteworthy that industrial approach does not require to apply any special-purpose systems for sphericity measurements, but recommends using a typical roundness measurement instruments.
The graph indicates that irradiation with circular polarization does not affect the roundness of the microstructures that is kept constant around a mean value of 0.8.
Roundness (R): roundness in geology is the degree of smoothing due to abrasion of sedimentary particles (psephicity).
As it can be observed from the Table 1, dead bacteria show higher fractal dimension and smaller roundness as compared to live bacteria.
However, adenoma volume was not correlated with other vessel architecture parameters (density: r = 0.2008, P = 0.5313; area: r = 0.3315, P = 0.2925; diameter: r = 0.162, P = 0.6146; perimeter: r = 0.138, P = 0.6685; roundness: r = -0.168, P = 0.6014).
Complementing the Roundness Tester is a Mitutoyo Formtracer SV-C3000, which is used for the very accurate tracing of complex forms and geometries.
Applying this method, the reference measure of roundness is fixed to the spindle to be calibrated by means of the centring adjustable device.
The SEA system includes high-resolution noncontact capacitive displacement sensors, precision probe mounts, precise masterball targets with less than 100 nm of roundness error, temperature sensors and software to acquire and analyze the measurements.
Designed for jobs such as finishing bearings and planetary gearboxes, the new grinding attachment can produce better than 10-microinch finishes and roundness of less than 60 microinches, with diameter size control of 0.025 mm (0.001 in.).
This has two tables and two cameras with a turn-over system, which checks the dimensions of the pieces both sides, top and bottom, internally and externally including roundness. Parts are loaded in bulk, and separated at the end of the inspection cycle into bins for good and bad parts.