Dynamic mechanical thermal analysis (DMTA) of the samples was carried out using an Eplexor 150N DMTA (Gabo Qualimeter
, Ahiden, Germany).
Dynamic properties were measured with an Eplexor dynamic mechanical analyzer (similar to DIN ISO 6721) from Gabo Qualimeter
Testanlagen GmbH using a slat specimen with 10 mm width, 2 mm thickness, 30 mm free clamping length, 10 Hz, 1% pre-strain and 0.
After a conditioning process (drying) these were used to determine the storage modulus E' through a dynamic mechanical-thermal analysis (DMA type EPLEXOR 500, GABO Qualimeter
Booth 10832 (Exhibiting w/Gabo Qualimeter
Tan [delta] (60[degrees]C) was measured using a dynamic spectrometer Eplexor 150N manufactured by Gabo Qualimeter
Testanlagen GmbH (Germany), applying a compression dynamic strain of 0.
For the measurements a dynamic mechanical analyzer, EPLEXOR 2000N (Gabo Qualimeter
Testanlagen GmbH, Ahlden, Germany) a 2-mm thick rectangular rubber vulcanizate strip of 35 mm x 10 mm was applied.
Tensile/flexure/compression: Ceast, Cam-Ten, Gabo Qualimeter
, Instron, MTS Systems, and Zwick.
Instrumentation: Analysis equipment, curemeters/rheometers, testers and testing equipment--thermal analysis and thermal properties measurement instruments and testing services; featuring the new highest-force dynamic mechanical (DMA / DMTA) testing instruments; Netzsch-Gabo Eplexor and Qualimeter
, flexometers for measurement of thermal fatigue of rubber, testing instruments for measurement of the dynamic durometer hardness or adhesive properties (autohesion) such as rubber compounds before vulcanization; thermal analyzers for polymer analysis including DSC, TGA, STA (DSC-TGA) and TMA with coupling to FTIR, MS and GC-MS for analysis of evolved gases; thermal conductivity by guarded hot plate and the laser flash method
Dynamic mechanical analysis (DMA) was performed with an Eplexor 2000N (Gabo Qualimeter
, Ahlden, Germany) using a constant frequency of 10 Hz in a temperature range from 20 to 230[degrees]C under nitrogen atmosphere.
The glass transition temperature Tg and flexibility of these composites were measured by a DMTA Model Eplexor QC 100N (Gabo Qualimeter
Dynamical mechanical thermal analysis (DMTA) was performed in an Eplexor 500 N instrument by Gabo Qualimeter
, operated in tensile mode.
Dynamic mechanical analysis (DMTA) measurements were carried out on a Qualimeter
EXPLEOR 500 N (Gabo, Germany) in tensile mode.