polyhedral


Also found in: Dictionary, Thesaurus, Encyclopedia, Wikipedia.
Related to polyhedral: Polyhedral dice

polyhedral

 [pol″e-he´dral]
having many sides or surfaces.

pol·y·he·dral

(pol'ē-hē'drăl),
Having many sides or facets.
[G. polyedros, many-sided, fr. poly- + G. hedra, seat, facet]
References in periodicals archive ?
Although faster solution times (33 hours faster to solve all 11 speed ratios), the polyhedral mesh performed poorly over the tetrahedral one (Figure 4).
Burmeister, "Thermolysis of polyhedral oligomeric silsesquioxane (POSS) macromers and POSS-siloxane copolymers," Chem.
Pielichowski, "Polyhedral oligomeric silsesquioxanes (POSS)-containing nanohybrid polymers," in Supramolecular Polymers Polymeric Betains Oligomers, vol.
In the design of controllers under constraints, the solution of the mp-LP (problem (2)) results in a PWA state feedback control law over the polyhedral regions in the space of parameters x(k) as follows [24]:
In this case, the polyhedral phase becomes coarser, but the change of the needle-like phase is not prominent.
It is to be noted that Figure 2 presents only the representation of the prismatic layer near wall with polyhedral cells in the center.
More precisely, we prove some uniqueness results for the solution of two kinds of Dirichlet boundary value problems for second- and fourth-order linear elliptic differential equations with discontinuous coefficients in the polyhedral angle [R.sup.n.sub.l], 0 [less than or equal to] l [less than or equal to] n - 1, n [greater than or equal to] 2, in weighted Sobolev spaces.
Such a structure consists of polyhedral islands of 20-40 [micro]m size embedded in a uniform closed network.
The present paper provides therefore a new method of constructing flexible multivariate distribution laws being well adapted to practical problems characterized by polyhedral contours of their sample clouds.
Table 3 reports the solutions of the reserve capacity value from two RNC problems with [q.sup.0] = (400, 800, 600, 200) and q = (600, 1050, 950, 100) separately and two RRNC problems with Q defined in the ellipsoid region ([theta] = 1.0) and the polyhedral region ([gamma] = 0.5).
The concrete implementation considered in [2], however, is restricted to the case where Y is polyhedral. In contrast, we also allow K to contain second-order cones.
Among these are the access to best-in-class model healing, benefits of precise B-rep and polyhedral hybrid modeling capabilities, as well as the ability to edit the 3D model directly.