He had pushed the die off the press, used a hoist to support the overhanging end
, then planned to rest the die on his thighs while he pushed the lifting attachments into the middle to lift it out fully.
Thus, the position of distal screw and middle screw as well, in view of statics, turns them into a simple beam with an overhanging end, loaded by a vertical force.
Biomechanics of the fractured femoral neck --the new bdsf--method of positioning the implant as a simple beam with an overhanging end. August 1st, 2012.
Once the glue is dry, remove the masking tape and trim off the overhanging ends.
Trim off the overhanging ends, then attach the front edging piece, and trim its ends.
Glue and tape the side bottom edge strips (E) in place, then trim off the overhanging ends
(See "Gluing Solid Wood Edging to Plywood," at left, and Photo 1.) Trim off the overhanging ends
, then glue and clamp the remaining edging pieces to the sides (B) and top (C).
Cut off the overhanging ends
of the transom frame side pieces (Photo 2), and cut off the overhanging edge of the transom frame top piece to follow the shape of the plywood.
Trim off the overhanging ends
with a sharp utility knife.
The easiest way to remove the overhanging ends
is to simply slice them off with a utility knife.