They provide greater than 5,000 megohms
of insulation resistance at 500 VDC and exhibit no evidence of dielectric withstanding voltage breakdown when tested in accordance with MIL-STD-1344, Method 3003.
@ .60) Other Ratings Contact Resistance: 10 milliohms maximum Insulation Resistance: 200 megohms
minimum @ 500V DC Dielectric Strength: 1,500V AC minimum for 1 minute minimum Mechanical Life: 30,000 operations minimum Electrical Life: 10,000 operations minimum Nominal Operating Force: 11.77N for maintained & 17.65N for momentary Angle of Throw: 34[degrees]
Designed for DC to 22 GHz applications, these 50 [OMEGA] connectors have a 1000 Vrms dielectric withstanding voltage and 5000 megohms
Glass micropipettes were broken to obtain low impedance electrodes (5-20 megohms
) when filled with 4% neurobiotin in 2 M NaCl for determining electrode tip locations.
The connector provides greater than 5,000 megohms
of insulation resistance at 500 VDC and exhibits no evidence of dielectric withstanding voltage breakdown when tested in accordance with MIL-STD-1344, Method 3003.
* An insulation resistance of 1,000 megohms
at 500 VDC.
Glass capillary electrodes, pulled to a resistance of 2 to 4 megohms
, were filled with a standard skate internal solution (5) and the fluorescent dye, Lucifer yellow (0.3%).
The top-to-bottom insulation resistance of each unit is [10.sup.5] megohms
(min) at rated voltage and room temperature.
Nominal linear range is specified for a high impedance load, typically 50 kilohms to 0.5 megohms
. Low load impedance can have a deleterious effect on linearity and nominal linear range.
200 V common-mode rejection, high input impedance (2 MegOhms
, typical) and factory pre-settable gain to accommodate low-level sensor inputs are also included.