input load

input load

the quantity of inferior alleles in the gene pool resulting from mutation and immigration.
Collins Dictionary of Biology, 3rd ed. © W. G. Hale, V. A. Saunders, J. P. Margham 2005
References in periodicals archive ?
In order to ensure that the mapping and resulting efficiency test did not turn into a hardware durability test, the maximum pinion input load would be limited to 677Nm (500lbft).
The system output traction has a good follow effect in comparison with input load. And the output load for power wagon random loading system can reproduce the tractive load for tested tractor reasonably.
Test 3 Test 4 Engine type DOHC 4valve Cylinder configuration Inline 4-cylinder Displacement 1497 cmJ Fuel Petrol Oil temp 80 degC Water temp 80 degC Engine speed 6800 r/min Bolt fastening force Base 11%down Input load by crankshaft Base 56% up
This mode operates in constant resistance with the additional capability for user-defined parameters that emulate the V-I characteristics of typical LEDs to apply as the input load.
The input load spectrum which used to predict the body life is compiled in nsoft software and using the 'low-high-low' load order.
The shear displacement of different measuring points increases with the increase of input load and the distance away from the table board.
In Figure 4 we show the average data loss rates in the HOS network as a function of the input load. Two different distributions for the interarrival time of the traffic generated by the servers are considered, that is, lognormal and Weibull.
[6]?Matching circuit: A circuit that equalizes an output circuit's load with the receiving-side circuit's input load, to maximize the power generated in an electrical signal transmission path.
The design width of a buffer depends on the input load, the filtration characteristics of the buffer area, and the desired level of control.
Also, based on actual load and UPS input parameters, a gen-set supplier should verify UPS input load with or without battery charging whether the UPS uses 6- or 12-pulse rectifiers.
Ideally, the communication subsystem could handle the worst-case input load without saturating, but cost considerations often prevent us from building such powerful systems.