the expected dose rate may exceed several hundred msv / h, up to the cavity, - smearing at the entry points of the pipes investigated to determine the surface contamination (bq / cm 2 ), - measurements of temperature, hygrometry
and dew point at the cavity.
Contract notice: Maintenance in operational condition (mco) and supply of spare parts for the doors and hatches of concreted aircraft shelters (ptaa) and the controlled hygrometry
(ehc) enclosures in service on air force air bases.
Contract notice: operational maintenance (ols) and provision of spare parts for concrete air shelters (ptaa) and controlled hygrometry
(ehc) enclosures in service at air force air force bases.
Contract notice: treatment of the hygrometry
rate of the valle verte site
The main services provided by the account holder include: - the precise definition (identification, Geometry, Location, ...) of the need for removal, Repositioning, Displacement, Disconnection of materials and equipment hindering the intervention, And associated preliminary studies, - preliminary and execution studies, - the completion of the work (surface preparation - which deposits existing coatings, Application of the new coating, Modifications of locksmithing and metal structure, Assembly / disassembly of scaffolding, Containment and ventilation of the building site, Conditioning of the ambient air in terms of temperature and hygrometry
, Removal / installation of ventilation ducts, Etc.).
the cold produced allows the thermal end treatment of the control center, the cff desks, the technical electrical rooms, the computer racks as well as the control of the pulsation temperatures of the monoblocks, - installation of heat production, - the installation of hot and cold water production at efs, - the installation of dedicated ventilation monoblocs (note that the control center must have a controlled temperature and hygrometry
the cold produced allows the thermal end treatment of the control center, cff offices, electric technical rooms, computer racks and the control of the pulsation temperatures of monoblocs; -the installation of the heat production -the installation of the domestic hot water production and the efs-installation of dedicated ventilation monoblocs (note that the control center must have a temperature and a hygrometry
controlled) .The amount cvcs integrates the 100% redundancy of cold productions and a redundancy on the monoblocks of the treatment of computer and local electrical racks.
this building must accommodate the following main activities: - a covered exterior arrival / departure area for the storage of parts and waste (100 m 2 ), - an air-conditioned clean room with controlled hygrometry
, equipped with a gantry 12 m long and with a capacity of 250 kg under a height of 3.2 m (170 m 2 ), - a storage area (90 m 2 ), - a shop with 2 rotating storages 7 meters high, requiring special foundations (40 m 2 ), - a storage area for forklifts, - technical zones for industrial maintenance activities (500 m 2 ), - office areas for supervision, support activities and social premises (90 m 2 ), - sanitary men / women / pmr, - technical rooms (bt, cfa, compressed air, manufacture of 250 hz), - a lift of people and charges.