Raghupathi,et,at, has been described a computer-aided system called "FORMING" for designing the forming sequence for multistage
forging of round parts.
ICI will boost its production level with the installation of the third
forging press line that will increase annual capacity from approximately 1.
Porosity is prevented through this
forging process because, in the
forging of a heated cast ingot, the ingot is consolidated, providing a sound center component.
If a known alloy of bar stock has a certain tensile strength, that tensile strength remains the same after
forging, assuming of course that all heat treatments are equal.
After isothermal annealing (without protective atmosphere), shot blasting, and phosphate coating and lubrication, the part is finished by cold
forging in two additional stages on a multistation press at rates of 60 pcs/min.
Companies Mentioned in this Report: Amtek Auto, Bharat Forge, Mahindra CIE Automotive, Ramkrishna
Forgings, Hilton Metal
Forgings, MM
Forgings, Pradeep Metals, Rajkumar Forge, Sanghvi
Forging & Engineering, Sundram Fasteners
The
forging process can save customers valuable production time as well.
Thomas Kablach has more than 40 years of experience in working with steel
forging and steel casting.
In
forging industries of Pakistan, usually there was no practice to calculate or analyze different stresses produced in the hot
forging dies.
TechNavio's analysts forecast the
Forging market in North America to grow at a CAGR of 4.
In automated lines is the weakest member
forging press.
