white coat

(redirected from finish coat)
Also found in: Dictionary, Thesaurus, Encyclopedia.
(1) The doctor’s ‘robe’
(2) A popular term for any health care professional who, in performing his or her duties, dons a white coat

white coat

1. A popular term for any health care professional who, in performing his/her duties, dons a white coat.
2. The physician's robe.
References in periodicals archive ?
"Because of their hard-cure Aqualink coatings, our Finish Coat products offer builders, carpenters and other professionals an industry first: labour-saving, ready-to-install, factory-quality hardwood trim that is designed to keep its perfectly coated showroom finish for years to come."
Two sets were prepared for each finish coat (Figure 3): the first was the finish coat sample prepared individually, while the second was the finish coat prepared together with primer or with the paint layer.
Some provide a matte finish coat. Others must be covered with a compatible surface finish (check manufacturer's instructions) and waxed and buffed.
Watson Steel Ltd (a division of Amec), structural design and fabrication engineers, built the masts and Project manager Kevin Butterworth explained the choice of finish coat: "The architect wanted a grey finish that looked like galvanising.
Colors integrated into finish coat. Provide excellent color retention and consistency; exterior maintains a new appearance for a longer period.
Paying close attention to the prep work can add years to the life of your finish coat of paint.
erect retaining wall, concrete footpaths, ramp and base for gas tanks.Erect boundary fencing and lighting poles.Lay tarmacadam base and finish coat. grade all bank, and effected areas of adjoining lands.
PPG Industries' industrial coatings business announced that Weaber Lumber Company's new line of Finish Coat interior trim products are protected by AQUALINK coatings, a revolutionary, engineered, baked-on coating developed by PPG to bring exterior durability and factory-controlled finishes to interior wood trim and molding.
The primers were developed for metal fabricators that require a "universal" primer because they may not know the eventual finish coat that will be used.
The new system incorporated one coat of Amercoat 240 edge-retentive epoxy from the water line to the rail and a finish coat of PSX 700SG epoxy-polysiloxane coating from the water line to the topside interface.
To finish the job, sand between the primer and split coat and between the split coat and the first finish coat with 220-grit (fine) sandpaper.
Services Shall Include Surface Preparation, Spot Priming, Applying An Intermediate Coat Of Paint And Applying A Finish Coat Of Paint To The District%s Gottwald Mobile Harbor Crane Tower