die plate

die plate

An obsolete device used to cast cusps for crowns.
References in periodicals archive ?
Tenders are invited for supply of extruder die plate
The RCBS die plate requires about 20 seconds to change from one caliber to another and I keep three of these handy, each holding die sets for the three mentioned cartridges.
Before starting up the pelletizer, the valve is switched to the "production" position for flushing the die plate. Next, with the valve in "divert" position, polymer can be cleaned out of the cutting chamber.
The extrusion can is then rolled over to the Discharge System where the product is pushed out by a platen through a perforated die plate, forming strands in the desired profile.
The extrusion can is rolled over to the Discharge System where product is pushed out by a platen through a perforated die plate, forming strands in the desired profile.
A video of the strands was taken after extruding them through the die plate, without influence on the process.
* The lowest cost per job using analog plates--half of the print and flexible die plate cost for most jobs
It features automatic indexing for maximum production and comes with a quick-change die plate, a quick-change powder measure, a quick-change powder drain tube, and zerk fitting for lubrication.
RCBS Die Plate/Shell Plate Rack is a stamped steel rack that holds a preset die plate, with a side slot to keep the five-station shell plate in place.
Pelletizing technology has been added to this company's equipment at the Davis-Standard Converting Systems Group facility, including an air ring pelletizer, a pelletizer retrofit design to increase pelletizing capacity, a die plate design and a conversion kit to double the life of the knife assembly on this company's existing pelletizers in applications producing normal, micro or macro pellets of all polymer types and processes from laboratory to high-capacity virgin resin plant sizes.
The cutting head assembly has been redesigned with a new universal joint, which makes sure the cutting edges remain perfectly aligned to the die plate. This design improvement increases the knife service life by up to 30%, thus ensuring maximum machine availability.
The new split turret design in conjunction with the new die plate and the removable upper and lower seal plates provides even faster disassembly of all turret components.