chamfer

(redirected from chamfering)
Also found in: Dictionary, Thesaurus, Encyclopedia.

cham·fer

(sham'fer),
A marginal finish on an extracoronal cavity preparation of a tooth describes a curve from an axial wall to the cavosurface.
[fr. O.Fr. chanfrein(t), beveled edge]

cham·fer

(shamfĕr)
A marginal finish on an extracoronal cavity preparation of a tooth describes a curve from an axial wall to the cavosurface.
[fr. O.Fr. chanfrein(t), beveled edge]

cham·fer

(shamfĕr)
Marginal finish on an extracoronal cavity preparation of a tooth that describes a curve from an axial wall to the cavosurface.
[fr. O.Fr. chanfrein(t), beveled edge]
References in periodicals archive ?
On the basis on the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate of Stationary Chamfering Machine for each application, including
Caption: The Black Widow Trim-It II uses a chamfering cutter (visible inside the tool).
Although most manufacturers specify the degree of edge finishing, there can be gray areas where a customer may not want a sharp 90 degree edge but does not specify chamfering.
Potential licensees in the construction accessories industry are currently being targeted as candidates to eventually commercialize the Chamfering Tool on a worldwide basis.
It has a 90 deg countersink to improve chamfering, reduce the need for deburring and support the entering of XD drills.
A chamfering insert was incorporated on the underside ring of the 100-mm diameter face mill, which solved the vibration problem.
The four-insert design permits 45-degree chamfering for diameters 0.433"-1.654".
Speedex (Engineering) Sales Inc., Pompano Beach, Fla., will be showing an automatic traveling, chamfering, and parting-off machine, model CP/110, which is capable of swarfless and noiseless cutting.
Once this has been completed all that is left is to make the necessary adjustments for inside chamfering and deburring.
All I have to say is the revolver chamfering tool kit from Brownells' is typical Brownells -- first class all the way with no corners cut anywhere.
The Kam-Set Automatic Size Control multi-tasking tool system is designed to make cylinder-boring operations more efficient with roughing, finish boring, and chamfering done--all in one machine cycle.