ceramic coating


Also found in: Encyclopedia.

ceramic coating,

n a thin layer of ceramic material, commonly hydroxyapatite, used to cover dental implants. This typically increases the hardness of the implant and can also make the implant bond more readily with bone.
Mentioned in ?
References in periodicals archive ?
Among the corrosion tests frequently run by the manufacturer of the CBPC product is one where the ceramic coating has gone more than 10,000 hours with no corrosion in a salt spray ASTM B117 test.
In autumn 2009, the JRC's Institute for Energy released its findings for a new 'head-end' process to liberate high temperature reactor fuel particles from their thick ceramic coatings in order to squeeze as much energy as possible out of the fuel.
The overall effect is the renewal of the ceramic coating.
Scientists there took the aluminum-enhanced ceramic coating and added Teflon into the pores.
EonCoat ceramic coating is a water-based, two-part spray coating that forms a dense, protective ceramic coating in minutes.
Oxide coatings dominate the ceramic coating market by type in terms of volume and value.
is the top most consumer of ceramic coating globally and is also its largest market for growing at a CAGR of 6.
With a variety of colors and a large network of Factory Trained and Certified Cerakote Applicators nationwide, it is now easier than ever to get the industry-leading high temperature ceramic coating applied and have a unique design tailored to every customer.
Saint-Gobain supplied Emalit Contrast, an abrasion-resistant ceramic coating over the firm's toughened, figured Masterglass.
As of September 2011, EonCoat, LLC, a ceramic coating company based out of Wilson, North Carolina, is certified to the National Sanitation Foundation (NSF)/American National Standards Institute(ANSI) Standard 61, a nationally recognized certification.
com)-- Cerakote is taking its wide variety of ceramic coating options on the road to back-to-back tradeshows at the Las Vegas Convention Center in Las Vegas, Nevada.
The dual-layer ceramic coating can be used both as a primer and a topcoat, and can be applied in a single pass that's dry to the touch in a minute, hard dry in 15 minutes and can be returned to service in an hour.