References in periodicals archive ?
Colonius, "An overview of simulation, modeling, and active control of flow/acoustic resonance in open cavities," AIAA Paper 2001-76, 2001.
Ceccio, "Partial cavity flows (part 1), cavities forming on models without span wise variation," Journal of Fluid Mechanics, vol.
In the second of these works, two cavities are once again considered (see Figure 1 in [16]).
Mode Spectrum Density in Lossless Cavities. In the 3D or closed cavity a number of natural field modes can be excited.
The resonance frequencies of the vacuum and loaded cavities are computed by formulas and experiment simulation with FDTD and compared.
Rossiter, as well as the majority of researchers utilizing Rossiter's formula, studied cavities open to the freestream with no influence of an opposing wall.
Perhaps it's just a failing on my part but that's the cause of my mild prejudice about bullet-mould cavities.
Breeding season studies suggest that cavities are a limiting factor for breeding populations of secondary cavity users (Scott, 1979; Newton, 1994; Holt and Martin, 1997).
It is, therefore, essential that before any insulation is installed, the cavities are checked for any blockages and cleared of them if need be.
The centrifugal force, due to rotation, pushed metal into the runners and mold cavities, and a vertical vortex formed along the axis of rotation.
CAVITY FIGHTER For his part in the saliva-test movement, developmental biologist Paul Denny of the University of Southern California's School of Dentistry is working to predict lifelong risk of developing cavities.
While some manufacturers of injection presses focus on optimizing the thermal equilibrium of the heating platen, Rep has opted for standardizing the thermal mapping at the mold parting line where the mold cavities are located.