calibrate

(redirected from calibrating)
Also found in: Dictionary, Thesaurus, Legal, Encyclopedia.

cal·i·brate

(kal'i-brāt),
1. To graduate or standardize any measuring instrument.
2. To measure the diameter of a tubular structure.

cal·i·brate

(kal'i-brāt)
1. To graduate or standardize any measuring instrument.
2. To measure the diameter of a tubular structure.

cal·i·brate

(kal'i-brāt)
1. To graduate or standardize any measuring instrument.
2. To measure the diameter of a tubular structure.
References in periodicals archive ?
Typical CBECs end use break downs should be determined and used as a sanity check when calibrating the energy model.
It realizes the film director's original vision by calibrating to the same industry standards that were used in the media creation.
A Marine Optical Buoy (MOBY) off the coast of Lanai in the Hawaiian Islands is the centerpiece of the primary ocean measurement site for calibrating satellite-born ocean color sensors.
Products include uniform light sources to calibrate imaging devices and camera systems in the visible and IR; light measurement systems for lasers, LEDs, and traditional light sources; and reflectance standards for calibrating spectroscopic measurement systems.
Tungsten ribbon lamps, the most readily available temperature standards, are usually supplied with calibrations to radiance temperature since they are normally intended for calibrating single-color pyrometers, where radiance temperature is appropriate.
AUSTIN, Texas -- Sanmina-SCI, one of the world's leading contract manufacturers, selected PXI modular instruments and test management software from National Instruments (Nasdaq:NATI) to develop an FDA-approved production tester for testing and calibrating medical devices that measure blood glucose levels.
NIST researchers have delivered prototype critical dimension reference materials for calibrating linewidth metrology instruments used in manufacturing semiconductor devices to International SEMATECH (ISMT) for evaluation by member companies.
The microwave measuring receiver, which provides frequency coverage up to 50 GHz, will be used by AFMETCAL for calibrating signal generators and step attenuators to meet stringent government and commercial accuracy requirements.
The SRMs were designed for calibrating wavelength-measuring instruments such as optical spectrum analyzers and wavelength meters.
DTP70: The agile DTP70 reads a typical ICC color target in less than three minutes and measures smaller targets for calibrating color proofing systems in just 30 seconds.
Calibrating the scale factor of the NIST Ultraviolet (UV) Microscope requires determining the regression slope for UV Microscope measurements on a traceable reference standard.