blood culture

Also found in: Dictionary, Thesaurus, Financial, Acronyms, Encyclopedia, Wikipedia.

Blood Culture



A blood culture is done when a person has symptoms of a blood infection, also called bacteremia. Blood is drawn from the person one or more times and is tested in a laboratory to find and identify any microorganism present and growing in the blood. If a microorganism is found, more testing is done to determine the antibiotics that will be effective in treating the infection.


Bacteremia is a serious clinical condition and can lead to death. To give the best chance for effective treatment and survival, a blood culture is done as soon as an infection is suspected.
Symptoms of bacteremia are fever, chills, mental confusion, anxiety, rapid heart beat, hyperventilation, blood clotting problems, and shock. These symptoms are especially significant in a person who already has another illness or infection, is hospitalized, or has trouble fighting infections because of a weak immune system. Often, the blood infection results from an infection somewhere else in the body that has now spread.
Additionally, blood cultures are done to find the causes of other infections. These include bacterial pneumonia (an infection of the lung), and infectious endocarditis (an infection of the inner layer of the heart). Both of these infections leak bacteria into the blood.
After a blood infection has been diagnosed, confirmed by culture, and treated, an additional blood culture may be done to make sure the infection is gone.


Culture strategies

There are many variables involved in performing a blood culture. Before the person's blood is drawn, the physician must make several decisions based on a knowledge of infections and the person's clinical condition and medical history.
Several groups of microorganisms, including bacteria, viruses, mold, and yeast, can cause blood infections. The bacteria group can be further broken down into aerobes and anaerobes. Most aerobes do not need oxygen to live. They can grow with oxygen (aerobic microbes) or without oxygen (anaerobic microbes).
Based on the clinical condition of the patient, the physician determines what group of microorganisms is likely to be causing the infection and then orders one or more specific types of blood culture, including aerobic, anaerobic, viral, or fungal (for yeasts and molds). Each specific type of culture is handled differently by the laboratory. Most blood cultures test for both aerobic and anaerobic microbes. Fungal, viral, and mycobacterial blood cultures can also be done, but are less common.

Key terms

Aerobe — Bacteria that require oxygen to live.
Anaerobe — Bacteria that live where there is no oxygen.
Bacteremia — Bacteria in the blood.
Continuous bacteremia — A kind of bacteremia where bacteria is always in the blood.
Intermittent bacteremia — A kind of bacteremia where the bacteria enter the blood at various time intervals.
The physician must also decide how many blood cultures should be done. One culture is rarely enough, but two to three are usually adequate. Four cultures are occasionally required. Some factors influencing this decision are the specific microorganisms the physician expects to find based on the person's symptoms or previous culture results, and whether or not the person has had recent antibiotic therapy.
The time at which the cultures are to be drawn is another decision made by the physician. During most blood infections (called intermittent bacteremia) microorganisms enter the blood at various time intervals. Blood drawn randomly may miss the microorganisms. Since microorganisms enter the blood 30-90 minutes before the person's fever spikes, collecting the culture just after the fever spike offers the best likelihood of finding the microorganism. The second and third cultures may be collected at the same time, but from different places on the person, or spaced at 30-minute or one-hour intervals, as the physician chooses. During continuous bacteremia, such as infective endocarditis, microorganisms are always in the blood and the timing of culture collection is less important. Blood cultures should always be collected before antibiotic treatment has begun.

Laboratory analysis

Bacteria are the most common microorganisms found in blood infections. Laboratory analysis of a bacterial blood culture differs slightly from that of a fungal culture and significantly from that of a viral culture.
Blood is drawn from a person and put directly into a blood culture bottle containing a nutritional broth. After the laboratory receives the blood culture bottle, several processes must be completed:
  • provide an environment for the bacteria to grow
  • detect the growth when it occurs
  • identify the bacteria that grow
  • test the bacteria against certain antibiotics to determine which antibiotic will be effective
There are several types of systems, both manual and automated, available to laboratories to carry out these processes.
The broth in the blood culture bottle is the first step in creating an environment in which bacteria will grow. It contains all the nutrients that bacteria need to grow. If the physician expects anaerobic bacteria to grow, oxygen will be kept out of the blood culture bottle; if aerobes are expected, oxygen will be allowed in the bottle.
The bottles are placed in an incubator and kept at body temperature. They are watched daily for signs of growth, including cloudiness or a color change in the broth, gas bubbles, or clumps of bacteria. When there is evidence of growth, the laboratory does a gram stain and a subculture. To do the gram stain, a drop of blood is removed from the bottle and placed on a microscope slide. The blood is allowed to dry and then is stained with purple and red stains and examined under the microscope. If bacteria are seen, the color of stain they picked up (purple or red), their shape (such as round or rectangular), and their size provide valuable clues as to what type of microorganism they are and what antibiotics might work best. To do the subculture, a drop of blood is placed on a culture plate, spread over the surface, and placed in an incubator.
If there is no immediate visible evidence of growth in the bottles, the laboratory looks for bacteria by doing gram stains and subcultures. These steps are repeated daily for the first several days and periodically after that.
When bacteria grows, the laboratory identifies it using biochemical tests and the gram stain. Sensitivity testing, also called antibiotic susceptibility testing, is also done. The bacteria are tested against many different antibiotics to see which antibiotics can effectively kill it.
All information is passed on to the physician as soon as it is known. An early report, known as a preliminary report, is usually available after one day. This report will tell if any bacteria have been found yet, and if so, the results of the gram stain. The next preliminary report may include a description of the bacteria growing on the subculture. The laboratory notifies the physician immediately when an organism is found and as soon as sensitivity tests are complete. Sensitivity tests may be complete before the bacteria is completely identified. The final report may not be available for five to seven days. If bacteria was found, the report will include its complete identification and a list of the antibiotics to which the bacteria is sensitive.
One automated system is considered one of the most important recent technical advances in blood cultures. It is called continuous-monitoring blood culture systems (CMCCS). The instruments automatically monitor the bottles containing the patient blood for evidence of microorganisms, usually every 10 minutes. Many data points are collected daily for each bottle, and fed into a computer for analysis. Sophisticated mathematical calculations can determine when microorganisms have grown. This, combined with more frequent blood tests, make it possible to detect microbial growth earlier. In addition, all CMBCS instruments have the detection system, incubator, and agitation unit in one unit.


Ten ml (milliliter) of blood is usually needed for each blood culture bottle. First a healthcare worker locates a vein in the inner elbow region. The area of skin where the blood will be drawn must be disinfected to prevent any microorganisms on a person's skin from entering the blood culture bottle and contaminating it. The area is disinfected by wiping the area with alcohol in a circular fashion, starting with tiny circles at the spot where the needle will puncture the skin and enlarging the size of the circles while wiping away from the puncture site. The same pattern of wiping is repeated using an iodine or iodophor solution. The top of the bottle is disinfected using alcohol. After the person's skin has been disinfected, the healthcare worker draws the blood and about 10 ml of blood is injected into each blood culture bottle. The type of bottles used will vary based on whether the physician is looking for bacteria (aerobes or anaerobes), yeast, mold, or viruses.


Discomfort or bruising may occur at the puncture site or the person may feel dizzy or faint. Pressure to the puncture site until the bleeding stops reduces bruising. Warm packs relieve discomfort.

Normal results

Normal results will be negative. A single negative culture does not rule out a blood infection. False negatives can occur if the person was started on antibiotics before the blood was drawn, if the environment for growth was not right, the timing was off, or for some unknown reason the microorganism just didn't grow. Three negative cultures may be enough to rule out bacteremia in the case of endocarditis.

Abnormal results

The physician's skill in interpreting the culture results and assessing the person's clinical condition is essential in distinguishing a blood culture that is positive because of a true infection from a culture that is positive because it became contaminated. In true bacteremia, the patient's clinical condition should be consistent with a blood infection caused by the microorganism that was found. The microorganism is usually found in more than one culture, it usually grows soon after the bottles are incubated, and it is often the cause of an infection somewhere else in the person's body.
When the culture is positive because of contamination, the patient's clinical condition usually is not consistent with an infection from the identified microorganism. In addition, the microorganism is often one commonly found on skin, it rarely causes infection, it is found in only one bottle, and it may appear after several days of incubation. More than one microorganism often grow in contaminated cultures.



American Society of Microbiology. 1752 N Street N.W., Washington, D.C. 20036. (202) 737-3600. 〈〉.
Gale Encyclopedia of Medicine. Copyright 2008 The Gale Group, Inc. All rights reserved.


1. the propagation of microorganisms or of living tissue cells in special media conducive to their growth.
2. to induce such propagation.
3. the product of such propagation.
4. the shared values, beliefs, and practices of a particular group of people, which are transmitted from one generation to the next and are identified as patterns that guide the thinking and action of the group members. adj., adj cul´tural.
cell culture the maintenance or growth of animal cells in vitro, or a culture of such cells.
blood culture microbiologic examination of a blood sample to check for presence of microorganisms.
continuous flow culture the cultivation of bacteria in a continuous flow of fresh medium to maintain bacterial growth in logarithmic phase.
enrichment culture one grown on a medium, usually liquid, that has been supplemented to encourage the growth of a given type of organism.
hanging-drop culture a culture in which the material to be cultivated is inoculated into a drop of fluid attached to a coverglass inverted over a hollow slide.
primary culture a cell or tissue culture made by direct transfer from a natural source to an artificial medium.
selective culture one grown on a medium, usually solid, that has been supplemented to encourage the growth of a single species of microorganism. It may also include substances that inhibit the growth of other species.
shake culture a culture made by inoculating warm liquid agar culture medium in a tube and shaking to distribute contents evenly. Incubation of the resolidified culture allows the development of separated colonies; especially adaptable to obligate anaerobes.
slant culture one made on the surface of solidified medium in a tube which has been tilted to provide a greater surface area for growth.
culture-specific syndrome folk illnesses that are unique to a particular culture or geographical area. Each illness has a cluster of symptoms, signs, and behavioral changes that are recognized by members of the culture; usually, they also have a range of symbolic meanings and culturally agreed-upon treatments. Anorexia nervosa and Type A behavior pattern are examples of syndromes specific to industrialized cultures.
stab culture a culture into which the organisms are introduced by thrusting a needle deep into the medium.
streak culture a culture in which the surface of a solid medium is inoculated by drawing across it, in a zig-zag fashion, a wire inoculating loop carrying the inoculum.
suspension culture a culture in which cells multiply while suspended in a suitable medium.
tissue culture the maintaining or growing of tissue, organ primordia, or the whole or part of an organ in vitro so as to preserve its architecture and function.
type culture a culture of a species of microorganism usually maintained in a central collection of type cultures.
Miller-Keane Encyclopedia and Dictionary of Medicine, Nursing, and Allied Health, Seventh Edition. © 2003 by Saunders, an imprint of Elsevier, Inc. All rights reserved.

blood culture

A specimen of blood collected and cultured for bacteria, to identify the presence of clinically significant bacteraemia (CSB).

To ensure that blood cultures (BCs) are not falsely negative, 3 10-ml specimens should be obtained, spaced no closer than 1 hour apart; BC specimens should be collected with an anticoagulant to prevent clotting, another source of false-negative results. CSB occurs in acute open traumatic wounds, sepsis syndrome, spillover from severe infections (e.g., meningitis, pneumonia), deep abscesses of the liver or kidney, localised intravascular infection, or as part of chronic (e.g., disseminated gonorrhoea or meningococcal bacteraemia) or multisystem (e.g., enteric fever, leptospirosis, or brucellosis) infections.
Segen's Medical Dictionary. © 2012 Farlex, Inc. All rights reserved.

blood cul·ture

(blŭd kŭl'chŭr)
Microbiologic culture of a blood specimen.
Medical Dictionary for the Health Professions and Nursing © Farlex 2012

blood culture

Incubation of a sample of blood in a suitable culture medium so as to encourage reproduction of bacteria, which are possible causes of disease, for purposes of identification.
Collins Dictionary of Medicine © Robert M. Youngson 2004, 2005

blood cul·ture

(blŭd kŭl'chŭr)
Microbiologic culture of a blood specimen.
Medical Dictionary for the Dental Professions © Farlex 2012
References in periodicals archive ?
Out of 50 blood culture positive cases, Widal test ease positive in 26 and negative in 24 cases.
A total of 36 positive blood culture bottles from 36 patients admitted in the critical care unit were analyzed; 72.2% of patients were males and 27.8% were females.
Table-II: Association of Blood Culture with I/T ratio and CRP.
The p-value using Chi square test was less than 0.001 showing significant association between Typhidot and blood culture results.
Effects of Preincubating Blood Culture Bottles at 37 [degrees]C during the night shift and of collected blod volume on time to detection and days to final report.
Second, almost half of the patients had a history of antibiotic use before admission and also, 29.8% of patients had received at least one dose of antibiotics before obtaining blood culture. Third, the patients were not evaluated in terms of healthcare-associated SSTIs.
Automated microbial detection systems (AMDSs) are widely used in microbiology laboratories to allow a rapid and automated detection of positive blood cultures. Such systems rely on continuous monitoring, through a colorimetric or fluorescent sensor, of carbon dioxide (C[O.sub.2]) produced by growing microorganisms.
Interestingly, a study from China has reported high sensitivity and specificity of real time PCR in contrast to those of blood culture; hence, claimed RT-PCR to be more reliable, appropriate and quick technique to isolate the bacteriological cause of NS.7 In another study, panel of experts proved that blood culture is not only less sensitive but it also delays the results for 2-3 days compared to PCR which offers increased sensitivity and rapid diagnosis1.
Durbin et al., "Direct identification of Staphylococcus aureus from positive blood culture bottles," Journal of Clinical Microbiology, vol.
Clinical suspicion and appropriate blood culture conditions are essential for proper diagnosis and management.
The median time to positive for valve culture was somewhat shorter than for blood culture (5.5 days).
A positive blood culture was considered to be a contaminant if any of the following organisms was detected: alpha-haemolytic streptococci, Micrococcus spp., Propionibacterium spp., Corynebacterium spp., Bacillus spp., and sometimes enterococci and Acinetobacter spp., depending on the clinical status of the patient.