batt

(redirected from batt insulation)
Also found in: Dictionary, Encyclopedia.

batt

A regionally popular term for a needle used to inject drugs.
Segen's Medical Dictionary. © 2012 Farlex, Inc. All rights reserved.
References in periodicals archive ?
It uses DOW STYROFOAM[TM] Brand Spray Polyurethane Foam (SPF), instead of the traditional batt insulation, and DOW THERMAX[TM] ci Exterior Insulation, a Polyisocyanate foam, and a very popular choice of building insulation material.
* Install fiberglass batt insulation during your remodel Step-by-step instructions at thefamily handyman.com/fiberglassbatts.
6 For separating walls that need sound-proofing or insulation, install semi-rigid batt insulation. Simply push the insulation between the vertical studs.
Green insulation: Eco-friendly materials and techniques, like non-fiberglass batt insulation or brand-name spray foam Icynene, increase energy efficiency and mold resistance with fewer harmful emissions.
Insulating with loose-fill fiberglass and cellulose or fiberglass batt insulation is relatively inexpensive and will most likely pay for itself in two to eight years, depending on the situation.
To this end, eco-responsible building materials from hardwood flooring from managed forests, to low-VOC paints, water-conservative plumbing fixtures and a mixture of water-based foam and formaldehyde-free batt insulation which also brings the homes to an R-40 rating are offered.
(600 mm) Rebar N/A 15 m (#5) Sheathing 1/2-in plywood (12.7 mm) N/A Insulation Figerglass batt insulation. Thickness: 87.5 mm (R13) Wall covering Regular 1/2-in gypsum board Cladding Vinyl cladding Stucco cladding Vapor barrier 6-mil polyethylene vapor barrier Table 3.
Insulate between the basement and the living area above, and beside it in the case of a semi-finished basement, with the thickest batt insulation that will fit in the joist or stud cavity.
The inside block surface has vertical Furring strips at i6 inches on center with batt insulation between the furring, followed by a vapor barrier then covered with a 1/2 inch of drywall.
The 1,918-square-foot home has a flat-roof system made of multiple layers of steel, rigid foam, and fiberglass batt insulation.