antimony trioxide

(redirected from antimony oxide)
Also found in: Encyclopedia.

an·ti·mo·ny tri·ox·ide

A compound used in paints and flameproofing; also formerly used as an expectorant and emetic.
References in periodicals archive ?
Smoke density also can be much lower than for a formulation with 5 phr antimony oxide and 45 phr calcium carbonate.
It is anticipated that the demand for antimony oxide globally will increase with population growth, increased automotive production, and housing growth.
Flame Retardant Market by Type (ATH, Antimony Oxide, Brominated, Chlorinated, Phosphorous), Application (Epoxy, Polyolefins), and End-use Industry (Building & Construction, Electronics & Appliances, Wire & Cables, Automotive) - Global Forecast to 2021
Antimony oxide nanoparticles have been synthesized in this research through sonochemical method, and the effect of various parameters, including concentration and ratio, have been studied on the structure of nanoparticles.
The classical synergism on the chemical side is the age-old antimony oxide that must be paired with a halogen donor at a 1:3 ratio as the antimony trihalide (chlorine or bromine) is the key active ingredient.
salts, sodium contain cobalt, bromide, manganese salts antimony oxide or antimony.
New titanium catalyst technology for the industrial production of PET polyester is now being adopted around the globe as PET manufacturers and processors seek to eliminate the use of the heavy metal catalyst antimony oxide.
A new titanium catalyst technology for the industrial production of polyethylene terephthalate (PET) polyester is now being adopted around the globe, as PET manufacturers and processors seek to eliminate the use of the heavy-metal catalyst, antimony oxide.
The second largest growth market is antimony oxide.
Summary: A comprehensive study on the synthesis, characterization and application of antimony oxide (a-Sb2O4) has been reported in this paper.
has obtained a patent for an antiglare film comprised of a substrate; and an antiglare coating composition coated on the substrate, the antiglare coating composition is comprised of an acrylate binder resin; 2- 30% weight of inorganic fine particles selected from a group consisting of alumina, aluminum hydroxide, magnesium oxide, antimony oxide, and silica having an average particle size ranging from 0.
Some specific paper topics include atomic layer deposition f antimony oxide on hydrogen-terminated silicon substrates, dopant and carrier concentration profiling with atomic resolution by scanning tunneling microscopy, fabrication of suspended Ge-rich nanowires, photoluminescence study of ion implanted silicon after rapid thermal annealing, and hafnium oxide etching using hydrogen chloride gas.