Alternatively, the exact resistances required in the
voltage divider can be built up by connecting additional resistors in series to make the desired values of [R.sub.1] and [R.sub.2].
A
voltage divider is necessary in this case since the varactor needs a voltage with larger magnitude compared to the gate voltage.
Both stationary gate detector-systems use photomultiplier tubes, magnetic shields,
voltage divider assemblies and microprocessors to link the individual detector arrays together and monitor detection results.
For the simultaneous measurement of several components of the total current of artificial lightning generated in a high-voltage high-current discharge circuit of the LCG, it was required to develop and create a special measuring matching
voltage divider (MVD), which is connected to the output of an additional shielded coaxial communication line (Fig.
Voltage divider on resistors R9-R10 is installed on input circuit.
In electronics, a
voltage divider (also known as a potential divider) is a linear circuit that produces an output voltage (Vout) that is a fraction of its input voltage (Vin).
Since the tunneling parameters affect the memristance if a voltage is applied to the memristors terminals, the
voltage divider method of reading in [25] should be manipulated to be consistent with our analysis.
The load is connected between output terminals and the node of the capacitive
voltage divider.
In gas-insulated high voltage switchgear a small electrooptic crystal maybe integrated into a capacitive
voltage divider where it measures a small fraction of the line voltage [2-4].
The system is designed with a built-in CNC interface and 50:1
voltage divider. Its drag cutting technology and controls provide for operator use.