The samples were uniaxially
drawn under ambient conditions of 23[degrees]C and 28% relative humidity at a draw ratio of 1.
Taking into account the coefficient of linear thermal expansion [alpha], equation 1 yields the following relationship for temperature-dependent tensile stress [sigma](T) when a uniaxially
stretched specimen is heated at a constant clamping length L:
The processing units were uniaxially
film stretching MDO industrial-scale machine and a lab-scale line under high cooling rate.
2 mm, and were uniaxially
deformed to 1% strain and the stress measured as a function of time.
The second step is to orient the film uniaxially
in the machine direction.
The powder was mixed with pore former compacted uniaxially
into cylinders of porous HA and biscuit fired.
Virtually any part that can be uniaxially
ejected from a rigid die can be made by either process.
Damage Mechanism and Fatigue Behaviour of Uniaxially
and Sequentially Loaded Wound Tube Specimens
Rectangular PET sheets (10 cm wide, 40 mm long, and 100 pin thick), cut from the extruded films, were uniaxially
stretched in an Instron mechanical testing machine (ElectroPuls[TM] E3000) equipped with an environmental chamber.
The mixed powder was poured into a 15mm diameter die and uniaxially
pressed at pressure of 111 MPa.
A 250kN uniaxially
or at least A 1000 Nm in torsion tests.
Sirringhaus et al developed a method of forming uniaxially
aligned polymers by heating the deposited layer to the liquid crystal phase to induce alignment and then rapidly cooling.