reproducibility

(redirected from Reproducibility of results)
Also found in: Dictionary, Thesaurus.

re·pro·duc·i·bil·i·ty

(rē'prō-dūs'i-bil'i-tē),
1. Ability to cause to exist again or to present again.
2. Ability to duplicate measurements over long periods of time by different laboratories.

reproducibility

Lab medicine  The degree of agreement among repeated measurements of a particular parameter, presented in terms of a standard deviation or coefficient of variation of the results in a set of measurements

re·pro·duc·i·bil·i·ty

(rē'prō-dūs'i-bil'i-tē)
1. Ability to cause to exist again or to present again.
2. Ability to duplicate measurements over long periods by different laboratories.

reproducibility

(re-pro-doos-i-bil'i-te)
1. The quality of being provable again by repeated experimentation. See: research
2. A quality control test of radiographical output for multiple exposures using the same exposure factors. These factors must not vary by more than ±5%.
References in periodicals archive ?
The enhanced version of the TipCharger System incorporates a controller module that helps increase the reproducibility of results, shorten automation cycle times, and eliminate environmental waste and liquid disposables in automated assays.
Considering CTC platforms, particularly for use in patient management, requires careful consideration of accuracy, precision, and reproducibility of results. Thank you for the opportunity to clarify these key points in current and developing CTC technologies.
The use of the patented VITA method allows high catalyst lifetime and long-term stability of calibration as well as reproducibility of results at a dynamic measuring range.
trachomatis with the Amplicor assay: initial [A.sub.450] values in a series of consecutive samples and reproducibility of results according to absorbance subsets.
Increasingly our laboratory range is being used for assay work, where reproducibility of results is crucial -- The digital tachometer on the L4RT gives a constant speed readout and is invaluable for applications where process validation and reproducibility is required.
The unique ceramic load cell technology provides exceptional linearity and reproducibility of results. Single and dual range models are available.