PLD

(redirected from Pla)
Also found in: Dictionary, Thesaurus, Acronyms, Encyclopedia, Wikipedia.

PLD

Abbreviation for:
partial lipodystrophy
people with learning disabilities  
percutaneous lumbar discectomy
phospholipase D
platelet defect
polycystic liver disease
posterior latissimus dorsi
References in periodicals archive ?
PLA thanks all the candidates who stood for election as well as all the members who voted.
"The successful startup of this state-of-the-art PLA plant is good news for consumers and producers who want to make a conscious choice to improve their carbon footprint and make their contribution to a circular economy.
For PLA, Young's modulus was about 10 GPa between -20[degrees]C and 40[degrees]C, showing little change over the measured temperature range.
The ES process of the PLA, PLA + CNT-OH, and PLA + f-CNT fibres was conducted under processing parameters established in our previous studies [50, 51].
The mechanical properties of pure PLA and blends were determined using a tensile tester (Instron 4464; Instron, USA), and impact strengths were measured using an impact tester (Model 43-76; TMI Test Machines Inc., USA).
However, tensile strength decreased with the addition of starch to PLA. OTRs and WVTRs increased with the addition of NCC and MDI to PLA-CS blends, but decreased with the addition of starch to PLA.
Tambien se realizo un analisis termogravimetrico del PLA sin procesar (PLAsp) y procesado (extrudido e inyectado) (PLAp2), de los compuestos de PLA y de las muestras hidrolizadas, usando un equipo TGA 7 marca Perkin Elmer.
Tensile strength and elongation at break of neat PBAT and PBAT/PLA composite films with different amounts of PLA (10 to 50 wt%) are displayed in Figure 1a and 1b, respectively.
However, the challenge is the major problem associated with poor interfacial adhesion between the hydrophilic starch granules and the hydrophobic PLA, leading to poorer mechanical properties.
She is an active member in PLA and served on the PLA board, chaired the Public Libraries advisory board, and chairs PLA's Leadership Task Force.