muF


Also found in: Dictionary, Thesaurus, Acronyms, Encyclopedia, Wikipedia.

μF

/μF/ microfarad.

μF

abbreviation for microfarad.
References in periodicals archive ?
Aqueles colados com EPI e MUF tiveram o mesmo comportamento, com inchamentos de 9,12 e 9,01%, respectivamente.
Os BLCs aderidos com MUF demonstraram inchamento de 14,19% e, os colados com RF maior estabilidade, com 11,66% de inchamento.
De acuerdo con lo expuesto, las colas UF y MUF resultan adecuadas para la fabricacion de tableros de A.
El adhesivo MUF produjo los valores mas altos de resistencia en la linea de adhesivo alcanzando las especificaciones minimas impuestas por norma UNE 56-777-92.
The basic argument we develop in this paper is that the capital acquisition explanation alone is not adequate to account for the widespread prevalence of MUF and that there are indeed situations where MUF is preferable for both capital acquisition and agency reasons.
In the following sections, we develop our core argument that international MUF (IMUF) provides to franchisors greater ability to reduce opportunism than does international SUF (ISUF).
0 to form a UF polymer as a backbone structure and then coreact with melamine to form the MUF resin and 2) to set the maximum melamine contents in the system not to exceed 0.
These applications have expanded the interest in melamine-modified UF resins for structural applications other than conventional hotsetting MUF resins in edge gluing and laminating.
Chamber "A" - Chamber "B" - Chamber "C" - Initial test Initial test Repeat test Controls and expected Controls and potential Controls and mix of low-formaldehyde formaldehyde expected emitting adhesives: emitting adhesives: low-formaldehyde emitting and potential formaldehyde emitting: Cloth only Cloth only Cloth only Southern pine Southern pine Southern pine Aspen Aspen Aspen PF-ply (filler and PRF (filler) PF-ply (filler and extender) extender) PF-OSB MUF PRF (filler) PMDI UF Table 2.
Usually, the PVA adhesive used in this study is not used in EWE UF, MUF, and PUR are more commonly used by the EWF industry to bind the face and core layers together.
The UF (BTLU RW-25) and MUF (BTLMU400) powdered resin adhesives were supplied by BTL Specialty Resin Corporation (Toledo, Ohio), and the powdered PF resin (GP 5479) and the control liquid UF resin adhesive (GP 403D23) were supplied by Georgia-Pacific Resins in Crossett, Ariz.