The La (III) ions in material liquid phase
diffused through the water between the material liquid phase
and the membrane phase.
In combination with Figures 2 and 3, it is found that when the thermal conductivity of the gas is less than that of the liquid phase
, the temperature gradient near the interface is outward and the heat flow passes through the gas slug inward.
[??] equilibrium liquid phase
composition; [??] moist solid phase composition; A, pure solid of K[H.sub.2]P[O.sub.4]; B, pure solid of KN[O.sub.3]; W, water; M, solubility of K[H.sub.2]P[O.sub.4] in water; N, solubility of KN[O.sub.3] in water; S, cosaturated point of K[H.sub.2]P[O.sub.4] and KN[O.sub.3].
Deki, "Preparation and characterization of alkyl sulfate and alkylbenzene sulfonate surfactants/ Ti[O.sub.2] hybrid thin films by the liquid phase
deposition (LPD) method," Applied Surface Science, vol.
The objective of this study is to develop a simple explicit model for determination of carbon dioxide solubility and liquid phase
ionic equilibria in aqueous alkanolamine solutions simultaneously.
Qualitative Description for the Liquid Phase
' Optical Depth
In order to analyze the spray variation of liquid phase
and vapor phase of the three injectors, 20 spray images in one loop at 1.0ms after start of fuel (ASOF) were analyzed via POD method under various injection conditions.
A characteristic feature of the heterogeneous ternary system CaC[O.sub.3.sup.-]water-gas is that hydrogen is not driven out from the liquid phase
to the gas phase in any form, unlike in the aqueous solutions of CaS, where hydrogen is transferred to the gas phase in the form [H.sub.2]S .
The pyrolysis processes were carried out in a stainless steel tube reactor with a diameter of 40 mm and a length of 500 mm using a fixed-bed reactor to collect the liquid phase
. A nitrogen carrier gas was passed through the reaction tube to keep the reaction system in an inert environment and to remove volatile products from the biomass pyrolysis system.
In the gas-liquid membrane contactors for gas separation, the liquid phase
plays crucial role in the overall mass transfer because it is the controlling phase.
If the process of pre-compression of molding powder mixture is not followed by significant power consumption, the deformation process of sealed moisture-laden charge is followed by the structural and mechanical changes of molded samples (reorientation and packaging of polydisperse particles, their adhesive interactions, etc.) and migration of the liquid phase
from zones of maximum stress.
25 February 2014 - US measurement specialist Agilent Technologies Inc (NYSE:A) and UK lab solutions maker CambTEK Ltd have agreed to jointly commercialise the latter's Rapid Extraction System (RES) automated sample preparation technology with Agilent's liquid phase
separation, life science and chemical analysis instruments and software.