lauric acid

(redirected from Laurate)
Also found in: Dictionary, Thesaurus, Encyclopedia, Wikipedia.
Related to Laurate: laureate, methyl laurate

lau·ric ac·id

(law'rik as'id),
A fatty acid occurring in spermaceti, in milk, and in laurel, coconut, and palm oils as well as waxes and marine fats.
Synonym(s): N-dodecanoic acid

lauric acid

(lôr′ĭk, lŏr′-)
n.
A white solid fatty acid, C12H24O2, obtained chiefly from coconut and laurel oils and used in making soaps, cosmetics, esters, and lauryl alcohol.
References in periodicals archive ?
Then an artery clip was used to block the blood flow of the proximal heart end to separate the superficial part of the abdominal artery (approximately 0.5 cm in length), and 10mg/mL sodium laurate 0.2 mL was injected to the distal direction [13-15]; further, medical glue was used to close the puncture point.
Niosomal vesicles formulated with sorbitan laurate (HLB 8.6) got higher size range than the vesicles formulated with sorbitan oleate (HLB 4.3).
Based on the results from the previous study of CMC hydrophobization by transesterification of MERO (23), the reaction was performed in H20/DMF, catalyzed with potassium laurate at various reaction conditions and controlled low and high microwave power (Table 1).
Since a waxy ester with n = 10 appeared ideal for [TABULAR DATA FOR FIGURE 1 OMITTED] the elimination of the polar component in cellulose, a cellulose laurate (CW-LA) layer was formed on the bead surface.
INGREDIENTS WT% Phase A Natpure Sol (Sensient)(Glycerin (and) sucrose laurate 2.00 (and) sucrose dilaurate (and) sucrose trilaurate (and) sorbitol) Pelemol CCT (Phoenix) (Ca prylic/capric triglyceride) 10.00 Phase B Covacryl MV 60 (Sensient) (Sodium polyacrylate) 1.00 Glycerine 24.50 Phase C Pure water 59.40 Euxyl PE-9010 (schtilke) 1.00 (Ethylhexylglycerin (and) phenoxyethanol) PhaseD Covapearl Antique Silver 239 AQ (Sensient) 2.00 (CI 778911 CI77491 (and) dimethicone copolyol) Phase E Covasilic 15 (Sensient) (Silica dimethyl silylate) 0.10 PROCEDURE: Premix Covacryl MV 60.
The liquid crystal oil-in-water emulsion base is composed of two or more selected from the group consisting of sorbitan stearate, sorbitan laurate, behenyl alcohol, cetearyl alcohol, caprylic/capric triglyceride, cetearyl glucoside, polyglyceryl-10 pentastearate, and sodium stearoyl lactylate.
Natpure Sol (Sensient) (Glycerin (and) sucrose laurate 5.00
glycol & water & potassium laurate & tocopherol)
INGREDIENTS WT% Phase A Enhans PC-38 (Koster Keunen) 12.5 (Polyethylene, polycyclopentadiene, stearoxy dimethicone) Sunflower Wax (Koster Keunen) 5.5 (Helianthus annuus (sunflower) seed wax) Kester Wax K-60P (Koster Keunen) (Polyhydroxystearic acid) 5.0 Kester Wax K-24 (Koster Keunen) (Lauryl laurate) 5.0 Enhans SB-63 (Koster Keunen) 3.5 (Bis-PEG-12 dimethicone beeswax) Jeechem OP (Octyl palmitate) 20.5 Jeechem CTG (Caprylic/capric triglyceride) 11.0 Prestige Passion Pink (Mica, titanium dioxide, iron oxide) 6.0 Sumicos Polar Mist (Titanium dioxide) 5.0 Mica Sericite BC 285 (Mica) 11.0 Phase B Belsil TMS 803 (Trimethylsiloxysilicate) 5.0 Jeesilc CPS-211 (Cyclopentasiloxane) 10.0 PROCEDURE: Combine Phase A ingredients, mix and melt at 85 [degrees]C until uniform.