crystallization

(redirected from Crystallization Processes)
Also found in: Dictionary, Thesaurus, Legal, Financial, Encyclopedia.
Related to Crystallization Processes: crystallisation

crys·tal·li·za·tion

(kris'tăl-i-zā'shŭn),
Assumption of a crystalline form when a vapor or liquid becomes solidified, or a solute precipitates from solution.

crystallization

[kris′təlīzā′shən]
Etymology: Gk, krystallos, rock crystal
the production of crystals, either by cooling a liquid or gas to a solid state or by cooling a solution until the solute precipitates as a crystalline deposit. crystalize, v.

crys·tal·li·za·tion

(kris'tăl-ī-zā'shŭn)
Assumption of a crystalline form when a vapor or liquid becomes solidified, or a solute precipitates from solution.

crys·tal·li·za·tion

(kris'tăl-ī-zā'shŭn)
Assumption of a crystalline form when a vapor or liquid becomes solidified, or a solute precipitates from solution.

crystallization,

n the production or formation of crystals, either by cooling a liquid or gas to a solid state or by cooling a solution until the solute precipitates as a crystalline deposit.
Mentioned in ?
References in periodicals archive ?
This agrees well with the discussion above for isothermal crystallization processes.
Influence of molecular weight on rheological, thermal, and mechanical properties of PEEK
The experimental results for the heat flow versus time during the isothermal crystallization processes of neat PPS and PPS/TLCP composites at the different crystallization temperatures [T.
Isothermal crystallization kinetics of poly(phenylene sulfide)/TLCP composites
Comparison of different methods has shown that the Avrami analysis modified by Jeziorny and the method proposed by Liu and Mo could be successfully applied in description of nonisothermal crystallization processes of PP in the presence of kenaf fibers, while the Ozawa method, because of the secondary crystallization failed.
Nonisothermal crystallization kinetics of kenaf fiber/polypropylene composites
1/2]) of the crystallization of PCL/AT nanocomposites are decreased obviously, as listed in Table 2, which means that the crystallization processes of PCL/AT nanocomposites are finished in shorter time than that of the pure PCL.
Nonisothermal crystallization behavior of poly([epsilon]-caprolactone)/attapulgite nanocomposites by DSC analysis
The reason is that, at a given temperature, the crystallization processes, with different cooling rates, are at different stages, that is, the lower cooling rate process takes place toward the end of the crystallization process, whereas at the higher cooling rate, the crystallization process is at an earlier stage.
Nanocomposites of syndiotactic polypropylene: phase behavior and morphology
5 clearly displayed two major stages of crystallization processes.
Crystallization and thermal behavior of microcellular injection-molded polyamide-6 nanocomposites
In regimes II and IM, it is difficult to identify the crystals from the primary or secondary crystallization processes.
Crystallization and melting behavior of homogeneous and heterogeneous linear low-density polyethylene resins
Phase separation and crystallization processes were monitored simultaneously using a 20X objective lens.
Phase separation and rheological behavior during curing of an epoxy resin modified with syndiotactic polystyrene

Medical browser ?
Full browser ?