bond strength

(redirected from Bonding strength)
Also found in: Encyclopedia.

bond strength

amount of force required to break the connection between a bonded (dental) restoration and the tooth surface with the failure occurring in or near the adhesive/adherens interface.

bond strength

(bond strength)
Expression of degree of adherence between tooth surface and another material.
Mentioned in ?
References in periodicals archive ?
Based on operational viscosity, setting time, and groutability, the initial proportioning mixture was designed to be evaluated as crack repair materials, including compression strength, bending strength, and interfacial bonding strength. Furthermore, the modification mechanism was explored with powder X-ray diffraction, thermal analysis test, and microstructure observation.
Both, RelyX-Unicem resin cement and MultiCore build up material showed similar bonding strength.
VESTAKEEP PEEK L400G offers the strongest bonding strength with or without pre-plasma treatment.
Although mechanical interlocking clearly promotes the bonding strength between two materials, when considering that good adhesion occurs with a smooth adherend as well, there should be another type of mechanism which strongly affects the bonding.
Presented as offering high performance bonding strength to both similar and dissimilar substrates, Master Bond's Polymer Supreme 46HT-2 two-component adhesive features high-temperature resistance along with desirable toughness and strength, durability, thermal cycling and shock capabilities, and electrical insulation properties.
The initial bonding strength of the adhesive may be such that the seal can move on the host surface during assembly, which can result in quality or sealing issues.
According to CardXX, the PUR adds flexibility and durability, provides high bonding strength (20 to 30 lb/in., and has excellent heat resistance with a glass-transition temperature of approximately 250 F.
Some decrease in the strength of fibers was measured, but the overwhelming contribution to the loss of strength from calendering was found to be caused by a decrease in bonding strength.
This produces clay particles that are hydrated well between the interlayers, causing bonding strength to develop, while the surface of the clay itself is not over-saturated with free water.
For the main binder, a new CB (Chemical Bonding) segment was introduced to improve the dispersion and packing density of the magnetic particles, and the bonding strength between particles.
Dentine treatment effects on bonding strength of adhesive resin cements.