thread

(redirected from threaded)
Also found in: Dictionary, Thesaurus, Legal, Idioms, Encyclopedia.
Related to threaded: Threaded pipe

thread

(thred),
1. A fine strand of suture material.
2. A filamentous structure.
[M.E., fr. A.S. thraed]

thread

(thrĕd)
1. Any thin filamentous structure (e.g., a stringy substance present in the urine in some infectious diseases of the urinary tract).
2. Suture material.
References in periodicals archive ?
After testing and investigation, Gehl chose to use Spiralock threaded fasteners for added vibration resistance and holding power.
Here the bottle is heated and cooled during a 45-minute to 1-hour interval to remove the stresses that develop because the glass cools unevenly, particularly the threaded areas where it is not of uniform thickness, explained O'Donnell.
PHOTO : (Left) Previously, threaded inserts had to be manually screwed onto the locating pin prior to molding and unscrewed after each molding cycle.
Prior to selecting Emuge's Thrillers, self-reversing tapping heads were used to produce threaded holes, but problems with thread quality and high tapping equipment maintenance costs prompted Jim Sells, manufacturing engineering coordinator for Borg's Casting Group, to try the Thrillers.
Not until after World War II in 1948, did these countries agree upon a Unified thread form to provide interchangeability of threaded parts.
If thread quality is a lesser concern and small holes are to be threaded, conventional tapping remains the better solution.
With a deep, threaded hole, it is difficult to evacuate chips without recutting those chips and ultimately reducing tool life.
We believe that a unique threaded architecture like that of the XLR processor combined with integrated autonomous security acceleration will most effectively address the data throughput issues of traditional network systems.
The XLR processor is based on a unique threaded architecture supporting 32 threads on RMI-enhanced MIPS64(R) CPU cores.
The Thriller Tool is different from existing thread mills because it produces its own chamfered holes and produces threaded blind holes.
Step #2: The workpiece is moved over the threading tool to the bottom section to be threaded.