For simultaneous control of travel and hydraulic functions, the multifunction handle directs forward/reverse, lift/lower, horn, tilt, optional side-shift
and fourth auxiliary hydraulic function.
They later went on to design the side-shift
feature on the scissor lift, which became an industry standard, and today is a feature commonly found on scissor lifts of other OEMs," Woods said.
The system can accommodate standard and side-shift
carriages, general-purpose and light-material buckets, 4m truss booms, and lifting hooks.
For additional customization, optional components and functions--such as RFID readers, bar code scanners, 3D camera technology, robotic battery exchange system, automatic battery charging, side-shift
and tilt--may be specified.
An electric control box is mounted in the cab to operate the hydraulic side-shift
3 inches to the left or 22 inches to the right, the 8-degree tilt, up to 5-inch milling depth and optional dust control water kit.
Extra workers are required by Caterpillar after the consolidation of both side-shift
and centre-pivot backhoe loader production in Desford last year, as well as increasing demand.
The extra workers are required by Caterpillar after the consolidation of both side-shift
and centrepivot backhoe loader production in Desford last year, as well as increasing demand.
Its homing accuracy has been improved through an interactive rack-and-pinion, side-shift
It is designed to provide the operator with proportional fine control ability to the lift/lower and side-shift
functions of the blade, and adds single hand straight-up and straight-down blade control.
5 gallons) per minute, shock-load stabilizing, and patented side-shift
and tilt adjustment three-point hitch controls--all located on the right console.
Series two and three King Hitter ranges are linkage-mounted, operated directly behind the tractor and in an offset position with 46cm (18in) of hydraulic side-shift
Imminent move to a new purpose-built manufacturing facility, coupled with the desire to speed work cycles at its existing premises in Gillingham, has prompted Markus Products to invest in a fully reconditioned SC three wheeled forklift from Crown-Fully maintained and serviced by Crown, the newly purchased truck--fitted with integral side-shift
facility--is already paying for itself in a variety of ways.