setup

(redirected from setups)
Also found in: Dictionary, Thesaurus, Legal, Encyclopedia.

setup

Etymology: AS, settan, to set, up, on high
1 an arrangement of artificial teeth on a trial denture base.
2 a laboratory procedure in which teeth are removed from a plaster cast and repositioned in wax. It is used as a diagnostic procedure and in creation of a mold for a positioner appliance.

setup

(sĕt′ŭp)
The arrangement of teeth on a trial denture base.

setup,

n 1. the arrangement of teeth on a trial denture base.
2. a laboratory procedure in which teeth are removed from a plaster cast and repositioned in wax. May be used as a diagnostic tool to evaluate alternatives, as when some teeth are missing; also used to produce the mold to make a positioner appliance.
3. to prepare the armamentarium for a dental procedure.
References in periodicals archive ?
One way to reduce setups is by removing a plate with tooling intact, storing that plate in your tool room, and bringing it out again the next time you run a job.
These types of setups exist in processes that include only one type of product.
1 were also assured to be little even in the single resonator setup.
Further, for the optimal plan it is necessary to determine the order of execution of setups and a sequence of operations within each set up.
While accountants recognize the impact of setups on capacity, the accounting literature traditionally fails to incorporate the effect of internal setup activity on production-related decisions.
I think that's it and also when Lanny - not to take anything away from his record - but in the '80s the tour was a little bit more generous with course setup.
This is performed in a single setup by placing the part in a V-block, then using the system's 3-axis scanning probe.
The greater variety in the number and size of patterns run per day, the more flexible the line must be in handling setup.
The cost of a VPN setup depends on how much special hardware is needed and the type of VPN connection desired.
What I believe contributes to all of these problems is not being balanced in your setup.
mold temperatures of 170[degrees]C and 160[degrees]C allow a range of injection pressures at 120[degrees]C barrel temperature that define setups that meet the cure objectives.
The average Bluetooth user experience is full of complicated device and software setups, along with compatibility and security issues," said Donnie Wong, GPS product marketing manager at Socket Communications.