reline

(redirected from relined)
Also found in: Dictionary, Thesaurus, Encyclopedia.

re·line

(rē'līn'),
In dentistry, to resurface the tissue side of a denture with new base material to make it fit more accurately.
See also: rebase.

reline

/re·line/ (re-līn´) to resurface the tissue side of a denture with new base material in order to achieve a more accurate fit.

reline

[rēlīn′]
Etymology: L, re + linea
the resurfacing of the tissue side of a denture with new base material. See rebase.

re·line

(rē-līn')
In dentistry, the procedure undertaken in order to resurface the side of the denture in proximity to the tissue surface so as to make it fit more accurately and thereby increase the intraoral comfort of the wearer of the appliance.

re·line

(rē'līn)
In dentistry, to resurface tissue side of a denture with new base material to make it fit more accurately.
See also: rebase

reline,

v to resurface the tissue side (basal surface) of a denture with new base material so that it will fit more accurately. See also rebase.
References in periodicals archive ?
The earlier Philadelphia project relined 1,800 feet of 12-inch cast iron main, with leaking bell-joints recurring every 12 feet.
Since the Village s first sewer relining project, over 30,000 lineal feet of sewers have been relined.
Subsequently, three 90-inch and one 96-inch culverts designed to be relined by cured-in-place pipe were changed to centrifugally-cast-concrete pipe (CCCP) via value-added engineering.
9 hp air motor that's designed to operate in 6-to 12-inch relined pipes.
is a manufacturer and distributor of brake rotors, drums disc brake pads, relined brake shoes, wheel cylinders and brake hoses for the automotive aftermarket.
When the current exceeds the rated ampacity of the electrical components, the inductor must be shut down and relined.
Both culverts were relined with Sekisui SPR PVC machine wound spiral pipe, said Karl Bates, project manager/estimator with Indiana Reline, contractor for the project.
With a special type of weave and a new relining procedure, the hose can be adjusted so the bends and elbows are relined wrinkle-free and evenly.
To keep its 80 ton channel induction furnace in operation, Commercial Intertech had Fosbel maintain its furnace's slag line and vertical wall near the tap hole beginning in November 1986 and until it was relined about a year later.
Bates said the project originally called for the culvert to be relined with 132-inch HDPE liner, but ODOT District 2 issued an addendum that allowed 132-inch machine spiral wound PVC liner in addition to HDPE.
With its ability to operate in pipe as small as relined 8 inches, the versatile new Pioneer tractor is designed for unmatched pulling and inspection capability.
The relined furnace is being returned to full production at a controlled pace and should be up to at least 80 percent of capability within a few days.