metre


Also found in: Dictionary, Thesaurus, Legal, Financial, Acronyms, Encyclopedia, Wikipedia.

metre

See meter.

me·ter

(mē'tĕr)
1. The fundamental unit of length in both the SI and metric system, equivalent to 39.37007874 inches. Defined to be the length of path traveled by light in a vacuum in 1/299792458 sec.
2. A device for measuring the quantity of that which passes through it.
Synonym(s): metre.
[Fr. metre; G. metron, measure]

me·ter

(m) (mē'tĕr)
1. Fundamental unit of length in the SI and metric system, equivalent to 39.37007874 inches.
2. A device for measuring the quantity of that which passes through it.
Synonym(s): metre.
[Fr. metre; G. metron, measure]

metre

see meter.

Patient discussion about metre

Q. what is the normal range for young children for their sugarI tested my grandson the other day with my meter and it read 164?

A. Of course, if you have any suspicions or worries, you may want to consult a doctor (e.g. pediatricain)

More discussions about metre
References in periodicals archive ?
Japao East - A 10 metre wide zone extending approximately 175 metres along strike hosting 1 vein that contain 1 higher grade intersection at a thickness of 1.
In a new drill hole located 90 metres to the north of KD-39, hole KD-41 intersected 8.
Preliminary assay results from drilling into the Cuello East veins include intercepts of 3 metres at a grade of 9.
The first zone was previously discovered on one drill fence where intersections included 5 metres at 3.
4 kilometer of strike length and up to 560 metres down dip with an average width of 4.
which is currently undertaking a feasibility study at its Kalukundi project in the DRC and recently reported drill results of up to 53 metres of 2.
Subsequent drill testing for near-surface mineralization by Placer Dome only occurred on the M Zone structure along five 80 metre drill sections, over a 400 metre strike length, which delineated a 173,435 ounce inferred gold resource (2,900,232 tonnes grading 1.
1, collared approximately 150 metres southeast of holes MR1-04-44 & 45 that were located approximately on the axis of the fold structure that differentiates the south limb from the north limb.
It extends over widths across the hillside of 500 to 800 metres at an elevation of 4,300 to 4,500 metres.
Recent drilling is focused on defining the geometry of the sulphide body between elevations of -200 metres to -350 metres.
EDG008 is still drilling ahead in visibly very strong copper mineralization at a down-hole depth of 1500 metres (true depth of approximately 1460 metres below surface).
Basal Series (norite, gabbro and bronzitite) averaging 160 metres in thickness and hosting Nickel-Copper sulphide mineralization (Nye Basin area) with PGE's;