extrinsic postingposts added to the underside of a neutral casted orthotic, in order to 'bring the ground up to the foot' and to control destructive compensatory pronation (see Table 1)
|Forefoot posts||Post (extrinsic/intrinsic/combination of both) to improve medial-column stability; posting degree/type is dictated by angle between plantar aspects of forefoot and heel, available ranges of motion and level of control sought|
Extrinsic posts are added to the undersurface of the distal part of the orthotic shell, in effect 'bringing the ground up to the foot' and allowing foot to function in its natural orientation to ground and lower limb, whilst accommodating/resolving symptoms of the biomechanical problem
Intrinsic posts are added to the cast of the foot to allow the orthosis, made to the adapted cast, to alter the angulation of the medial column in relation to the ground surface. An intrinsically posted orthotic allows the forefoot to come down toward the ground surface during gait and resolves the biomechanical problem by modifying foot function
|Bar post||Post (2-5 mm thick) added to the underside of distal part of orthotic to create greater lateral column stability|
|Rearfoot posts||Extrinsic rearfoot post; post dimension is dictated by the angle between calcaneal bisection and midline of lower leg, and the level of control sought|
Blake post aligns distal edge of forefoot to parallel with undersurface of extrinsic rearfoot post, imposing considerable rearfoot control
Note: Functional orthoses are made to casts of the foot in subtalar neutral (i.e. point in the gait cycle when the midtarsal area is at its most stable).