dry friction


Also found in: Dictionary, Thesaurus, Legal, Encyclopedia, Wikipedia.
Related to dry friction: Fluid friction

dry friction

Friction using no liquid or other lubricant.
See also: friction
Mentioned in ?
References in periodicals archive ?
By changing parameters of the vibrations, it is possible to control the effective coefficient of dry friction and also the friction force between the part and the plane.
It gives wide possibilities to control the body transportation parameters (velocity, direction) while changing platform horizontal harmonic vibrations amplitude and frequency and also the duration and control moments of effective dry friction between the transportation body and the platform with respect of vibration period.
The dry friction segment reported improved sales of less than $.
However, the motor is only as good as the brakes that stop it--and friction pads on their dry friction brakes were failing all too often about every six weeks or so.
The need for improved lubricating technologies is critical when trying to solve tribological problems concerning dry friction or boundary lubrication under high temperatures.
Among the topics are the nature of rough surfaces, dry friction and wear, journal bearings, transient elastohydrodynamic lubrication, and bio-tribology.
Also, the dry friction between the piston and cylinder was neglected.
According to observations by Godet [1], dry friction is largely determined not by the properties of friction materials of the contacting pair, but by the characteristics of the structure and composition of the thin film that forms on the surface of both bodies as a result of compaction of the wear product, its chemical composition and oxidation.
Dry friction cleaning of plastic flake is a low-cost processing step that improves efficiency of the subsequent water-based flake cleaning systems.
The experiments were realized at the temperature 22[degrees]C, with load 50 and 150 N, all under conditions of dry friction.
The conflicting demands of weight reduction and reduced rolling resistance, coupled with increases in abrasion resistance, and wet and dry friction performance, are said to make the tire designer's life difficult.