References in periodicals archive ?
The objectives of the present study including evaluate of spatial interpolation methods for total dissolved solids zoning of DEHGOLAN aquifer of Kurdistan province, IRAN using the Geographical Information System (GIS).
Neither the total dissolved solids (TDS) found in this study (24 ppm to 121 ppm) nor the salinity (0.
Patterns in pH, Oxidation-Reduction Potential, Total Dissolved Solids, Specific Conductivity, and Salinity.
5 Alkalinity (mg/l) 2,000 Total hardness (mg/l) 440 Calcium (mg/l) 380 Magnesium (mg/l) 280 Chlorides (mg/l) 7,384 Dissolved oxygen (mg/l) Nil Biological oxygen demand (mg/l) 8,410 Total solids (mg/l) 88,610 Total dissolved solids (mg/l) 67,285 Table 2: Physicochemical characteristics of different day of partially treated distillery leachate.
For instance, higher estimates were recorded in the dry than in the wet season for air and water temperatures, total dissolved solids, chloride, total hardness, conductivity, salinity, alkalinity, dissolved oxygen, nitrate nitrogen, phosphate phosphorus, sulphate, calcium, magnesium, copper, and zinc.
Along with the potential for a 70% savings in water consumption, the process reduces the amount of chemistry used in continuous bleaching and, thus reduces the amount of dissolved solids entering the waste stream.
Also, look for a Total Dissolved Solids (TDS) value of 300 or greater.
But some bottled waters contain fewer total dissolved solids.
In approving the permit for the new storage ponds, the Lahonton board forbid any increase in nitrates in the groundwater beneath the plant and limited the amount of dissolved solids.
2 to 16 ml parts by volume of ultra pure water having an electrical resistance of 16 26 megohms, total dissolved solids of less than 0.
WaterPOINT 870 is the first fully integrated field handheld system that provides an entire panel of key water quality tests, including measurements for pH, ORP, conductivity, free chlorine, total chlorine, monochloramine, ammonia, total dissolved solids, carbonate alkalinity, calcium hardness, Langelier saturation index, calcium, carbon dioxide, and temperature.
Examples include the use of a more stable boiler water dispersant, for higher cycles and less boiler blowdown; or conversion to deposit control technology in recirculating cooling systems that tolerates higher dissolved solids, for less cooling tower blowdown, according to Johnston.