cold bend test

cold bend test

a test of the ability of a wire to be shaped; performed by counting the number of times a wire can be bent to a right angle and reversed at the same point before breaking; important in establishing specifications for orthodontic wires.

cold bend test

(kōld bend test)
Measurement of ability of a wire to be shaped; performed by counting number of times a wire can be bent to a right angle and reversed at the same point before breaking; important for orthodontic wires.
References in periodicals archive ?
Quality of the cladding layer and the core bond in bimetal profile of 16 mm diameter was estimated by cold bend test of special specimens.
Plates To Be Ultrasonically Tested As Per Productstandard Ht 10495 Rev-01,180 Degrees, Cold Bend Test As Per Astm A-480 And Impact Tested At Zero Degree Centigrade To Astm A 370/A20.
Stainless Steel Plate (13 Percent Cr-4 Percent Ni)As Per Astm A-240 Uns-41500 (Type 415), Ultrasonic Testing As Per Astm A435 At 150 Mm Grid, 180 Degree Cold Bend Test As Per Astm A 480 & Impact Tested At Zero Degree Centigrade To Astm A 370/A20.
All Plates To Be Ultrasonically Tested As Per Astm A-435 At 150 Mm Grid, 180 Degrees, Cold Bend Test As Per Astm A-480 & Impact Tested At Zero Degree Centigrade To Astm A 370/A20.
Limited Tenders are invited for 1)1250X5500x45 Tk (40 Nos) Stainless Steel Plate(13 Percent Cr-4 Percent Ni) As Per Astm A-240 Uns-41500 (Type 415), Ultrasonic Testing As Per Astm A435 At 150 Mm Grid,180 Degree Cold Bend Test As Per Astm A 480.
Tenders are invited for 1)1500X5500x45 Tk (45Nos) Stainless Steel Plate(13 Percent Cr-4 Percent Ni) As Per Astm A-240 Uns-41500 (Type 415), Ultrasonic Testing As Per Astm A435 At 150 Mm Grid,180 Degree Cold Bend Test As Per Astm A 480.