sterilization

(redirected from chemical vapor sterilization)
Also found in: Dictionary, Thesaurus, Legal, Financial, Encyclopedia, Wikipedia.

sterilization

 [ster″il-ĭ-za´shun]
1. the process of rendering an individual incapable of sexual reproduction, by castration, vasectomy, salpingectomy, or some other procedure. Endoscopic techniques for female sterilization that can be performed outside of a hospital without general anesthesia include culdoscopic, hysteroscopic, and laparoscopic sterilization (see subentries below).
2. the process of destroying all microorganisms and their pathogenic products. It can be accomplished by any of various methods, including heat (usually wet steam under pressure at 121°C for 15 minutes), gas plasma, irradiation, or a bactericidal chemical compound such as ethylene oxide, peracetic acid, or aqueous glutaraldehyde. The probability that a given process has made something sterile is known as its sterility assurance level. A level of 10−6 is recommended for organisms on a sterilized device.



In sterilizing objects or substances, the high resistance of bacterial spore cells must be taken into account. Most dangerous bacteria are destroyed at a temperature of 50° to 60°C, so that pasteurization of fluid, which is the application of heat at about 60°C, destroys disease-causing bacteria. However, temperatures almost twice as high are usually required to destroy the spore cells.

The discovery that heat, in the form of flame, steam, or hot water, kills bacteria made possible the advances of modern surgery, which is based on freedom from microorganisms, or asepsis, and prevention of contamination. Sterilization of all equipment used during operations and other procedures, and of anything that in any way may touch an operative field, is carried out scrupulously. Health care providers all wear sterile clothing. Instruments are sterilized by boiling, by chemical antiseptics, or by use of an autoclave.

Gamma sterilization uses the radioisotope cobalt 60 as the energy source to sterilize some medical supply products. It has the advantages of penetrating all types of packaging, decreasing quarantine time, requiring fewer personnel, and allowing for bulk processing.
culdoscopic sterilization use of an endoscope to visualize the fallopian tubes and ovaries for the purpose of preventing conception. The endoscope is inserted through an incision in the posterovaginal cervix. After the fallopian tubes are located, each tube is drawn out through the vaginal incision and severed. The major advantage of this procedure is that it can be done on an outpatient basis. A disadvantage is the complication of infection, a very real possibility owing to the unsterile nature of the vagina.
flash sterilization sterilization of unwrapped equipment at 132°C for three to ten minutes using steam.
gas sterilization sterilization by means of a bactericidal gas, frequently used for items that are heat and moisture sensitive. Ethylene oxide is the gas most often used; it is highly explosive and flammable in the presence of air, but these hazards are reduced by diluting it with carbon dioxide or fluorinated hydrocarbons. Gas sterilization is a chemical process resulting from reaction of chemical groups in the bacterial cell with the gas. Factors influencing gas sterilization include time of exposure, gas concentration, penetration of the gas, and temperature and humidity in the sterilizing chamber. Automatically controlled ethylene oxide sterilizers are usually heated to a temperature of 54°C (130°F). A humidity level of 35 to 70 per cent is recommended.
hysteroscopic sterilization use of an endoscopic instrument to visualize the interior of the uterus and fallopian tubes for the purpose of preventing conception. The hysteroscope is inserted through the dilated cervix and on through the uterine cavity to the point at which each tube joins the uterus. A cautery is then used to electrocoagulate each tube. Occlusion of the tubes is accomplished by scar tissue that forms at the sites of cauterization.
laparoscopic sterilization that which employs an endoscope to visualize the fallopian tubes and surrounding structures for the purpose of occluding the tubes. The instrument is guided into the abdominal cavity through a small puncture made by a trocar inserted immediately below the umbilicus. A second small puncture is made in the lower abdomen through which cautery forceps are inserted. The forceps are applied approximately 2 cm from the point at which each of the tubes joins the uterus. In this way each tube is electrocoagulated and severed. An alternative to cauterization and severance of the tubes is the application of clips. However, there is the possibility that the clips may not completely occlude the tubes, allowing passage of the ovum and impregnation.
terminal sterilization the final sterilization of instruments and equipment following use, thereby rendering them safe for handling.

ster·il·i·za·tion

(ster'ĭl-i-zā'shŭn),
1. The act or process by which an individual is rendered incapable of fertilization or reproduction, as by vasectomy, partial salpingectomy, or castration.
2. The destruction of all microorganisms in or about an object, as by steam (flowing or pressurized), chemical agents (alcohol, phenol, heavy metals, ethylene oxide gas), high-velocity electron bombardment, heat, or ultraviolet light radiation.

sterilization

/ster·i·li·za·tion/ (ster″ĭ-lĭ-za´shun)
1. the complete elimination or destruction of all living microorganisms.
2. any procedure by which an individual is made incapable of reproduction.

sterilization

[ster′ilīzā′shən]
Etymology: L, sterilis + Gk, izein, to cause
1 a process or act that renders a person unable to produce children. See also hysterectomy, tubal ligation, vasectomy.
2 a technique for destroying microorganisms or inanimate objects using heat, water, chemicals, or gases. sterilize, v.

sterilization

Reproduction medicine The process of rendering an organism or person inconceivable, irreproducible, or infertile, through tubal ligation, vasectomy, or orchiectomy. See Involuntary sterilization, Thermic sterilization, Surgical sterilization, Voluntary sterilization.

ster·il·i·za·tion

(ster'i-lī-zā'shŭn)
1. The act or process by which an individual is rendered incapable of fertilization or reproduction, as by vasectomy, partial salpingectomy, or castration.
2. The destruction of all microorganisms in or about an object, as by steam (flowing or pressurized), chemical agents (alcohol, phenol, heavy metals, ethylene oxide gas), high-velocity electron bombardment, or ultraviolet light radiation.

sterilization

1. The process of rendering anything free from living micro-organisms.
2. Any procedure, such as hysterectomy, tying of the fallopian tubes, vasectomy or castration that deprives the individual of the ability to reproduce.

sterilization

  1. the act of destroying all forms of microbial life on an object, thus making it sterile.
  2. the act of preventing an organism from reproducing, either by removing the gonads or by blocking the release of gametes by, for example, VASECTOMY.

sterilization

processes by which all microorganisms, including spores, virions and other resistant life forms are rendered inert, by means of exposure to high-pressure steam, chemical agents, high-velocity electron bombardment or short-wave radiation

sterilization 

The process or act of killing all microorganisms from a surface, equipment, medication, contact lenses, etc. It is achieved through the application of heat (dry or moist), chemicals, irradiation, supersonic waves, etc. See antiseptic; disinfection.

ster·il·i·za·tion

(ster'i-lī-zā'shŭn)
Destruction of all microorganisms in or about an object, such as by steam (flowing or pressurized), chemical agents (alcohol, phenol, heavy metals, ethylene oxide gas), high-velocity electron bombardment, heat, or ultraviolet light radiation.

sterilization,

n the act or process of rendering sterile; the removal of viable microorganisms.
sterilization, chemical,
n a method in which an object is immersed in a liquid containing sanitizing chemicals. Used for objects that cannot withstand high temperatures. Glutaraldehyde is one such sterilizer, which must be in contact with the instrument for at least 10 hours for proper sterilization. Other chemical sterilizers may require up to 24 hours of instrument contact. Colloquial term is
cold sterilization.
sterilization, chemical vapor,
n the process of destroying all living microorganisms through the use of chemicals heated under pressure to form a gaseous state. The various chemicals used include alcohol, formaldehyde, acetone, ketene, and water.
sterilization, steam,
n application of moist heat at 121° F for 15 minutes to destroy all microorganisms on an object. It is typically conducted in an autoclave, which applies approximately 15 psi of pressure to achieve this temperature.

sterilization

1. the process of rendering an animal incapable of reproduction, by castration, vasectomy, ovariohysterectomy or other procedure.
2. the process of destroying all microorganisms and their pathogenic products. It is accomplished by heat (wet steam under pressure at 120°C for at least 45 minutes, or dry heat at 160-180°C for 3 hours) or by bactericidal chemical compounds.

skin sterilization
not a practical possibility, but a marked temporary reduction in the bacterial population of the skin, as in presurgical preparation of the surgical site and the hands of operating personnel, is achieved with thorough scrubbing, soaking or repeated applications of antiseptics.

Patient discussion about sterilization

Q. Is it good to put alcohol on burns? If I get a burn- should I sterilize it with alcohol to prevent infections?

A. Tiffany is right...best to avoid alcohol. the treatment depends on the severity of the burn. here is a pamphlet about dealing with burns. very helpful!
http://familydoctor.org/online/famdocen/home/healthy/firstaid/after-injury/638.html

More discussions about sterilization
Full browser ?