chamfer

(redirected from chamfers)
Also found in: Dictionary, Thesaurus, Encyclopedia.

cham·fer

(sham'fer),
A marginal finish on an extracoronal cavity preparation of a tooth describes a curve from an axial wall to the cavosurface.
[fr. O.Fr. chanfrein(t), beveled edge]

chamfer

[cham′fər]
the finish line on an extracoronal cavity preparation for a crown restoration in which the junction between the crown and the remaining tooth structure is formed to create a sloping shoulder at the apical terminus of the restoration. See margin.

cham·fer

(shamfĕr)
A marginal finish on an extracoronal cavity preparation of a tooth describes a curve from an axial wall to the cavosurface.
[fr. O.Fr. chanfrein(t), beveled edge]

cham·fer

(shamfĕr)
Marginal finish on an extracoronal cavity preparation of a tooth that describes a curve from an axial wall to the cavosurface.
[fr. O.Fr. chanfrein(t), beveled edge]

chamfer (cham´fər),

n in extracoronal cavity preparations, a marginal finish that produces a curve from an axial wall to the cavosurface.
Mentioned in ?
References in periodicals archive ?
We can see that maximum axis misalignment that is compensated is equal to the half of the short side of the peg if peg has no chamfers while in case with chamfered peg, axis misalignment up to 3.
plug tap chamfer length = 3 to 5 times pitch length
On the above hole, use a plug tap to calculate the chamfer length: 0.
CATIA Feature Recognition technology will operate on the geometry of any 3D solid and automatically identify prismatic and transition features such as fillets and chamfers for design applications, as well as prismatic machining features for manufacturing applications.
Tilting drive trait has a range of +45 degrees to -10 degrees, allowing for measuring slanted surfaces and chamfers.
0's new modeling tools give our partners a greater level of surface and solid modeling refinement with improved ease of use via patterns, new skinning functions and vertex chamfers.
We recommend these breaks for all chamfers, especially when using stainless steel, to eliminate burrs.
A new command creates fillets and chamfers when edges are picked with ordinary Mechanical Desktop object selections such as "window" or "crossing".
The E-Z Burr carbide tool deburrs or chamfers the front, the rear, or both sides of a hole in a single pass by utilizing a projected diameter greater than that of the hole and a retracted diameter equal to or less than the hole.
Parasolid within MicroStation TriForma now allows architects to include freeform architectural features such as ledgers, reveals, moldings, niches, pilasters, splayed openings, complex chamfers, and waffle slabs into their single building models.
This power incline feature allows for measuring slanted surfaces and chamfers.
Other new part modeling features include extended support for SolidWorks' existing tools for lofted shapes, swept shapes, planes, chamfers, and other solid features.