bus

(redirected from busbar)
Also found in: Dictionary, Thesaurus, Encyclopedia, Wikipedia.

BUS

Abbreviation for Bartholin glands, urethra, Skene glands.

bus

a set of parallel wires in a computer to which the central processing unit and all input-output units are connected. Each separate wire carries the electric current representing 1 bit. Buses interconnect the parts of the computer that communicate with each other, such as a video card or modem.

bus

The hardware that controls the flow of commands between the main processor and other components—memory, peripherals, etc.

BUS

Abbreviation for:
Bartholin's, urethral, Skene's (glands)
biological units
buspirone
busulfan, see there
References in periodicals archive ?
The short circuit current of the 380 kV busbar feeding the EAF system is 11070 A, so the short circuit current of the 34.
It is assumed that there are 4 kinds of faults on each busbar of the power grid, and the voltage sag value of the busbar is calculated respectively.
Qatar Busbar Market By Type, By End User, Competition Forecast & Opportunities, 2011 - 2021" has evaluated the future growth potential of busbar market in Qatar and provides statistics and information on market structure, industry behaviour and trends.
Accounting for a value share of more than 40 per cent in 2015, Doha province dominates the busbar market in Qatar, and the region is forecast to continue its dominance during the forecast period.
Technavio's report, Global Busbar Market 2016-2020, has been prepared based on an in-depth market analysis with inputs from industry experts.
Asia-Pacific leads the busbar trunking system market with share of approximately 38.
The modular structure of Busbar Trunking system is suitable for various kinds of buildings and industrial units.
Busbar Trunking System BTS, also called Busways, stands out for ease of installation, flexibility, reusability and number of possible connection points.
The inductances and the effective resistances, in other words the impedances, of a shielded system of busbars at a certain frequency are closely related to the current distribution over the cross-section of each busbar generally known as "skin effect" and "proximity effect" of the nearby busbars and conductive shield.
With the dual-print process, the rear side is printed, followed by the screen Print of the front-side busbars and then the stencil print of the front-side grid/fingers.
Installation on 4-pole busbar systems is ensured by adjusting the adapter section.
Automation Systems Interconnect's (Mechanicsburg, PA) new DIN rail mount busbar system can be cut to any length, but is supportive enough for 2 or 3 busbars.