casting

(redirected from Diecasting)
Also found in: Dictionary, Thesaurus, Encyclopedia, Wikipedia.

cast·ing

(kas'ting),
1. A metallic object formed in a mold.
2. The act of forming a casting in a mold.

casting

1 the act of encasing a body part in a cast.
2 (in dentistry) the process by which crowns, inlays, and other metallic restorations are produced.
enlarge picture
Casting materials

casting,

n procedure in which a fractured bone is reset and immobilized in bandages impregnated with plaster.

cast·ing

(kast'ing)
A metal structure, such as an artificial tooth crown, produced by forcing molten metal into a mold.

casting,

n 1. a metallic object formed in a mold.
2. forming a casting in a mold.
casting flask,
casting machine,
n a mechanical device used for throwing or forcing a molten metal into a refractory mold.
casting machine, air pressure,
n a casting machine that forces metal into the mold via compressed air.
casting machine, centrifugal,
n a casting machine that forces the metal into the mold via centrifugal force.
casting machine, vacuum,
n a casting machine in which the metal is cast by evacuation of gases from the mold. Atmospheric pressure actually forces metal into the mold.
casting model,
casting ring,
casting temperature,
casting, vacuum,
n the casting of a metal in the presence of a vacuum. See also casting machine, vacuum.
casting wax,

casting

the technique of using a rope or a special harness designed for the purpose to make an animal fall to the ground or onto a specially prepared area. Used for large animals especially horses and cattle.

casting bed
the area designated for a cast animal to fall. It is usually cushioned with straw or, in the case of a permanent facility, rubber or other synthetic padding.
Burley casting method
one that uses a rope centered over the shoulders, crossed between the front legs, crossed over the back and then passed between the hindlegs, avoiding the scrotum or udder and with traction backwards. Used in cattle.
half hitches casting method
suitable only for cattle; a non-slip knot is applied around the neck and half-hitches are placed behind the front legs and around the flanks. Traction is applied backwards.
casting harness
an arrangement of leather or webbing straps, ropes and rings is applied to the hindlegs below the pasterns with ropes running forward through a shoulder harness. Traction on the ropes pulls the legs forward and the horse falls to one side. The ropes are used to tie the legs in a convenient position. Not suitable for use with cattle.
casting pen
used at abattoirs to restrain animals that are to be slaughtered according to the Jewish law. It is a restraint cage or cradle which enables the operator to tip the animal onto its back so that it can be slaughtered while it is still conscious.
References in periodicals archive ?
In current high-speed aluminum diecasting, microscopic air bubbles can form inside the part as the molten metal races through the mold.
BSC, which employs 52 people, produces diecast products that include zinc and aluminium pressure diecastings, engineering castings and castings.
After completely divesting aluminum in 1980 to focus on zinc, Zealous re-entered the aluminum diecasting market in 1996.
A number of iterations of the tooling evolved during the diecasting development and design-for-manufacture process," he said.
In Europe, the GF Automotive corporate group has decided to concentrate on iron and aluminum diecasting, and it will reduce its production footprint in Europe.
The diecasting facility expansion to supply aluminum components for steering and driveline systems will be completed by the end of this year.
Revstone operates diecasting facilities in Chihuahua, Mexico, Portage, Mich.
The carmaker initially will develop around 65 acres of the land to launch assembly and machining capacity, in addition to the diecasting operation.
announced it has purchased a magnesium diecasting facility in Chihuahua, Mexico, from Compass Automotive Group LLC, Franklin, Ind.
This guidebook from the Diecasting Development Council relates real-life experiences from US OEMs and includes a 14-point checklist that can protect you from the "hidden costs" of buying offshore die cast components.
Joe Dolack was a man like many others in 2008: he'd lost his job with a diecasting firm and was waiting for the phone to ring with the prospect of a new position.
the diecasting industry, including aluminum, magnesium and zinc production, is forecast to grow by 58% from 2009 to 2013, although it won't quite return to pre-recession production volumes.